Home
- Raspberry-Pi 5
- Raspberry Pi 4
- Raspberry PI 3
- Pi ZERO 1,2,w,WH,...
- Nano Computers
- Internet Of Things
- Microcontroller board
- Retro
- Young Engineers
- LEDs / NeoPixels / ElWire
- Sensor & prototyping
- Motor & robotic
- MakerBeam / Mechanical / CNC
- Electronics
- Electronic SMD
- Breakout board
- myDIN
- Case & enclosure
- PSU,Battery,Lipo,...
- Wire & cables
- Tools
- Various
- Documentation
- Destocking & Good deals
Trending
Special Products
128Gb SSD mSata for Pi Desktop (SSD HD MLC NAND, Transcend MSA370)
€83.96
€119.95
-30%
3.5" Touch screen for ODroid C2/C1+/ (XU4 compatible)
€32.70
€46.72
-30%
64Gb SSD mSata for Pi Desktop (SSD HD MLC NAND, Transcend MSA370)
€34.96
€49.95
-30%
Environnemental (Press. Temp. Hum. Gas)
There are 60 products.
Anemometer - Analog output
In Stock
Analog anemometer kit
range: 0-30 m/s (start wind at 0.4-0.8m/s)
resolution: 0.1m/s
Output signal: 0-5.0V
Input Voltage: 12-24V
range: 0-30 m/s (start wind at 0.4-0.8m/s)
resolution: 0.1m/s
Output signal: 0-5.0V
Input Voltage: 12-24V
€66.55
BMP280 Barometric pressure + Temperature + Altitude sensor - 3.3 et 5V
In Stock
BMP280 - Environmental sensor
Bus: I2C or SPI (Breakout and StemmaQT)
Temperature - ±1°C accuracy
Pressure - ±1 hPa absolute accuracy
5v and 3.3V compatible
Bus: I2C or SPI (Breakout and StemmaQT)
Temperature - ±1°C accuracy
Pressure - ±1 hPa absolute accuracy
5v and 3.3V compatible
€14.50
CO2 pro sensor - tricolor cross light / Ampel - USB
In Stock
CO2 measurement / CO2 Ampel
Tricolor cross light indicating the CO2 level
PRO version
Firmware: Covid Prevention
Interface: USB
Tricolor cross light indicating the CO2 level
PRO version
Firmware: Covid Prevention
Interface: USB
€79.01
CO2 pro wifi sensor - tricolor cross light / Ampel - WiFi ATWINC1500
In Stock
CO2 measurement / CO2 Ampel - WiFi version
Tricolor cross light indicating the CO2 level
PRO version
Firmware: Covid Prevention
Interface: USB, WIFI (ATWINC1500)
Tricolor cross light indicating the CO2 level
PRO version
Firmware: Covid Prevention
Interface: USB, WIFI (ATWINC1500)
€86.14
DS18B20 temperature sensor KIT + Extra
Last items in stock
DS18B20 temperature sensor, digital 1-wire (-55 to 125°C)
€4.94
€9.04
Gravity : VEML6075 UV sensor, I2C
In Stock
Ultraviolet Sensor, Gravity Interface
VEML6075 sensor
UVA (350 à 375nm)
UVB (315 à 340nm)
UV-I (UltraViolet Index) in visible light
3.3 to 5V
I2C interface
VEML6075 sensor
UVA (350 à 375nm)
UVB (315 à 340nm)
UV-I (UltraViolet Index) in visible light
3.3 to 5V
I2C interface
€8.48
Gravity Ozone Sensor 0-10ppm, I2C
In Stock
Gravity : Ozone O3 sensor
Range: 0-10ppm
Resolution: 0.01ppm
I2C interface
3.3V - 5.5V compatible
Range: 0-10ppm
Resolution: 0.01ppm
I2C interface
3.3V - 5.5V compatible
€57.17
Gravity: Analog CO2 Gas Sensor - MG-811 Sensor
In Stock
Capteur de CO2:
Alim: 5V
Capteur MG-811 (electro-chimique)
0-10.000 ppm
Sortie Analogique (2.7-4.1V)
Temps réponse: <20s (rapide)
Alim: 5V
Capteur MG-811 (electro-chimique)
0-10.000 ppm
Sortie Analogique (2.7-4.1V)
Temps réponse: <20s (rapide)
€62.11
Gravity: Analog TDS Sensor/Meter - Water quality measurement
In Stock
Gravity : TDS (Total Dissolved Solid) sensor
Cleanliness of water
Analog output : 0 to 2.3V
0 to 1000ppm
Power supply : 3.3 – 5V
Cleanliness of water
Analog output : 0 to 2.3V
0 to 1000ppm
Power supply : 3.3 – 5V
€14.28
Gravity: Analog Turbidity Sensor For Arduino
In Stock
Gravity : Turbidity measurement - Turbidimeter
Measurement of bodies suspended in a liquid
Analog output : 0 to 4.5V
Power supply : 5V
Measurement of bodies suspended in a liquid
Analog output : 0 to 4.5V
Power supply : 5V
€11.98
Gravity: DHT11 Temperature & Humidity Sensor For Arduino
In Stock
Gravity : relative humidity and temperature sensor
20 to 80 % Hrel
0 to 50 C (+/- 2 C)
20 to 80 % Hrel
0 to 50 C (+/- 2 C)
€7.22
Gravity: DHT22 Temperature & Humidity Sensor For Arduino
In Stock
Gravity : relative humidity and temperature sensor
0 to 100 % HRel
-40 to 80 C (+/- 0.5°C)
0 to 100 % HRel
-40 to 80 C (+/- 0.5°C)
€11.76
Gravity: Soil moisture reader, Capacitve, Analog output
In Stock
Capacitive Soil Moisture (humidity)
Analog output
Corrosion resistant
Gravity interface
Analog output
Corrosion resistant
Gravity interface
€7.27
€21.88
M5Stack: Ambiant light sensor (BH1750FVI-TR), Grove, I2C
In Stock
DLight - Ambiant light sensor
1 - 65535 Lux
BH1750FVI : high resolution Lux sensor
I2C Interface
Grove connector
U136
1 - 65535 Lux
BH1750FVI : high resolution Lux sensor
I2C Interface
Grove connector
U136
€7.80
M5Stack: TVOC/eCO2 Gas Sensor Unit (SGP30), Grove
In Stock
TVOC/eCO2 sensor, grove
SGP30 Sensor, air quality
Volatile organic compound
CO2 equivalent
Interface I2C (0x58)
Module U088
SGP30 Sensor, air quality
Volatile organic compound
CO2 equivalent
Interface I2C (0x58)
Module U088
€13.19
€19.81
MOD-BME280 - Temperature/Humidity/Pressure sensor
In Stock
Temperature - ±1°C accuracy
Athmospheric pressure - ±1 hPa absolute accuracy
Relative Humidity - ±1% accuracy
I2C (only)
1.8V to 3.3V
Athmospheric pressure - ±1 hPa absolute accuracy
Relative Humidity - ±1% accuracy
I2C (only)
1.8V to 3.3V
€8.72
MPL115A2, pressure and temperature sensor, I2C
In Stock
Athmospheric Pressure sensor using MEM's technology
Pressure 50 kPa~115 kPa (sensitivity 0.05 kPa)
Altitude 0.3m (corresponding to 0.05 kPa)
Temperature
I2C Interface
Pressure 50 kPa~115 kPa (sensitivity 0.05 kPa)
Altitude 0.3m (corresponding to 0.05 kPa)
Temperature
I2C Interface
€12.05
pH measurement PRO kit, Gravity, analog
In Stock
pH meter kit
PRO - Industrial Probe (v2)
Power: 3.3 to 5V
Output: Analog 0 to 3.4V
Detection range: 0 - 14
Accuracy: +/-0.1 @ 25°C
SEN0169-v2
PRO - Industrial Probe (v2)
Power: 3.3 to 5V
Output: Analog 0 to 3.4V
Detection range: 0 - 14
Accuracy: +/-0.1 @ 25°C
SEN0169-v2
€66.16