Search results
There are 44 products.
4 digits BLUE display - 7 segments - I2C - 14.2mm
Out-of-Stock
4 digits display (14.2mm) - 7 Segments
BLUE
I2C interface
Qwiic/StemmaQT
BLUE
I2C interface
Qwiic/StemmaQT
€15.90
SHT45 : humidity & temperature precision sensor - Sensirion - I2C - Qwiic / StemmaQT
Out-of-Stock
Humidity & Temperature sensor
High precision sensor
5V & 3V3
Breakout
Qwiic / StemmaQT conn.
I2C addr: 0x44
Sensirion SHT45
High precision sensor
5V & 3V3
Breakout
Qwiic / StemmaQT conn.
I2C addr: 0x44
Sensirion SHT45
€15.73
Adafruit QT Py - ESP32-S2 WiFi - STEMMA QT
Out-of-Stock
ESP32 development board
USB-C
ESP32-S2 @ 240 Mhz
4 Mio Flash
2 Mio PSRAM
QT Py / Xiao Form-factor
USB-C
ESP32-S2 @ 240 Mhz
4 Mio Flash
2 Mio PSRAM
QT Py / Xiao Form-factor
€15.37
BMP280 Barometric pressure + Temperature + Altitude sensor - 3.3 et 5V
In Stock
BMP280 - Environmental sensor
Bus: I2C or SPI (Breakout and StemmaQT)
Temperature - ±1°C accuracy
Pressure - ±1 hPa absolute accuracy
5v and 3.3V compatible
Bus: I2C or SPI (Breakout and StemmaQT)
Temperature - ±1°C accuracy
Pressure - ±1 hPa absolute accuracy
5v and 3.3V compatible
€14.50
[T] - Afficheur I2C JAUNE 4 chiffres de 7 seg. - 14.2mm
In Stock
4-digit display (14.2mm) - 7 segments YELLOW with I2C support
€13.07
PYBD Butterfly for Pyboard-D, breakout of X-Y position
Last items in stock
KIT PYBD adaptateur board (Pyboard-D)
Breakout of positions X & Y
1x Connecteur UEXT (I2C+SPI+UART)
1x StemmaQT / Qwiic (I2C)
2x Groove (I2C, UART)
3.3v & GND rails
UART & I2C connectors
Breakout of positions X & Y
1x Connecteur UEXT (I2C+SPI+UART)
1x StemmaQT / Qwiic (I2C)
2x Groove (I2C, UART)
3.3v & GND rails
UART & I2C connectors
€11.07
Bidirectional I2C isolator, ISO1540
In Stock
I2C isolator, ISO1540 breakout
Bidirectional
Level shifter
1 Mhz
3-5V compatible
Stemma QT, Qwiic compatible
Bidirectional
Level shifter
1 Mhz
3-5V compatible
Stemma QT, Qwiic compatible
€10.29
Extender / Terminator bus I2C, LTC4311
Out-of-Stock
Extender / acive terminator I2C bus, LTC4311
400 Khz
1.6V to 5.5V
Improve the transition
low noise
400 Khz
1.6V to 5.5V
Improve the transition
low noise
€9.08
Adafruit QT Py - SAMD21 - STEMMA QT
In Stock
SAMD21 development board
USB-C
ATSAMD21E18 @ 48 Mhz
256 Kio Flash
32 Kio PSRAM
QT Py / Xiao Form-factor
USB-C
ATSAMD21E18 @ 48 Mhz
256 Kio Flash
32 Kio PSRAM
QT Py / Xiao Form-factor
€8.75
TSL2591 : Digital light sensor Lux/Luminosity
In Stock
Digital light sensor measuring light over a wide Lux range.
188 µLux to 88.000 Lux
I2C interface (Breakout & StemmaQT)
3.3V - 5V
188 µLux to 88.000 Lux
I2C interface (Breakout & StemmaQT)
3.3V - 5V
€8.69
CanSat base board for Pico
Out-of-Stock
CANSAT base board with Raspberry Pico
Fitting for Pico
97 points prototyping area
40 points FPC connector
Fitting for Pico
97 points prototyping area
40 points FPC connector
€8.42
Pico proto + Case A - for Pico or Pico-W
In Stock
Board & Case for prototyping with Raspberry-Pi Pico / Pico Wireless
Based on Pi A case (included)
Breakout board for Pico or Pico-W
Conn. Qwiic/StemmaQt
Conn. Grove
Version V2.0
Based on Pi A case (included)
Breakout board for Pico or Pico-W
Conn. Qwiic/StemmaQt
Conn. Grove
Version V2.0
€7.90
IS31FL3731 - I2C LED matrix controler, 16x9 CharliePlexing, PWM, Qwiic/StemmaQT
In Stock
LED charlieplexing driver
IS31FL3731 chip
2.7 to 5.5V
Interface I2C
16x9 = 144 LEDs
PWM dimmable
RAM for 8 frames
Qwiic / StemmaQT connector
IS31FL3731 chip
2.7 to 5.5V
Interface I2C
16x9 = 144 LEDs
PWM dimmable
RAM for 8 frames
Qwiic / StemmaQT connector
€7.77
Pico-HAT r2: Hat Interface for Raspberry-Pi Pico
In Stock
Control HATs and sensors from Your Raspberry-Pi Pico
Expose RPi GPIO header
Expose UEXT connector
Expose Grove, Qwiic, StemmaQT connectors
Map UART, I2C, SPI buses
Map Pico GPIO to RPi GPIO header
Reset button
Pico GPIOs replicat from prototyping
Expose RPi GPIO header
Expose UEXT connector
Expose Grove, Qwiic, StemmaQT connectors
Map UART, I2C, SPI buses
Map Pico GPIO to RPi GPIO header
Reset button
Pico GPIOs replicat from prototyping
€6.92
ATtiny816 breakout with SeeSaw - StemmaQt / Qwiic
In Stock
Breakout ATtiny816
Multi-purpose GPIO expander (I/O, ADC, PWM, NeoPixel)
Firmware SeeSaw
Interface: I2C
Multi-purpose GPIO expander (I/O, ADC, PWM, NeoPixel)
Firmware SeeSaw
Interface: I2C
€6.70
MCP4725 - digital/analog converter (DAC) - 12 bits - I2C interface
In Stock
Numeric to analog converter for Microcontroler
12 bits résolution
I2C Interface
Breakout & Qwiic/StemmaQT con.
A true analog output!!!
12 bits résolution
I2C Interface
Breakout & Qwiic/StemmaQT con.
A true analog output!!!
€6.24
Prototyping board for Hammond 1551case
In Stock
Prototyping board
for Hammond 1551 case
74 x 74mm
microUSB footprint
for DC/DC regulator
Qwiic/StemmaQT conn.
for Hammond 1551 case
74 x 74mm
microUSB footprint
for DC/DC regulator
Qwiic/StemmaQT conn.
€6.17
JST-SH 4 poles wiring - alligator - Stemma QT, Qwiic
Last items in stock
Wiring cable - alligator clips
JST-SH 4 Pins, 1mm
StemmaQT (Adafruit) compatible
Qwiic (SparkFun) compatible
JST-SH 4 Pins, 1mm
StemmaQT (Adafruit) compatible
Qwiic (SparkFun) compatible
€3.85
JST-SH 4 poles cable to male pins - 150mm - Stemma QT, Qwiic
Out-of-Stock
Wiring cable 150mm
JST-SH 4 poles, 1mm
to Male pins
StemmaQT
Qwiic
JST-SH 4 poles, 1mm
to Male pins
StemmaQT
Qwiic
€1.32
JST-SH 4 poles cable 100mm - Stemma QT, Qwiic
Out-of-Stock
Wiring cable 100mm
JST-SH 4 poles, 1mm
StemmaQT
Qwiic
JST-SH 4 poles, 1mm
StemmaQT
Qwiic
€1.32
JST-SH 4 poles cable 50mm - Stemma QT, Qwiic
In Stock
Wiring cable 50mm
JST-SH 4 poles, 1mm
StemmaQT
Qwiic
JST-SH 4 poles, 1mm
StemmaQT
Qwiic
€1.32