Search results
There are 44 products.
JST-SH 4 poles cable 100mm - Stemma QT, Qwiic
Out-of-Stock
Wiring cable 100mm
JST-SH 4 poles, 1mm
StemmaQT
Qwiic
JST-SH 4 poles, 1mm
StemmaQT
Qwiic
€1.32
JST-SH 4 poles wiring - alligator - Stemma QT, Qwiic
Last items in stock
Wiring cable - alligator clips
JST-SH 4 Pins, 1mm
StemmaQT (Adafruit) compatible
Qwiic (SparkFun) compatible
JST-SH 4 Pins, 1mm
StemmaQT (Adafruit) compatible
Qwiic (SparkFun) compatible
€3.85
JST-SH 4 poles cable 50mm - Stemma QT, Qwiic
In Stock
Wiring cable 50mm
JST-SH 4 poles, 1mm
StemmaQT
Qwiic
JST-SH 4 poles, 1mm
StemmaQT
Qwiic
€1.32
JST-SH 4 poles cable to male pins - 150mm - Stemma QT, Qwiic
Out-of-Stock
Wiring cable 150mm
JST-SH 4 poles, 1mm
to Male pins
StemmaQT
Qwiic
JST-SH 4 poles, 1mm
to Male pins
StemmaQT
Qwiic
€1.32
IS31FL3731 - I2C LED matrix controler, 16x9 CharliePlexing, PWM, Qwiic/StemmaQT
In Stock
LED charlieplexing driver
IS31FL3731 chip
2.7 to 5.5V
Interface I2C
16x9 = 144 LEDs
PWM dimmable
RAM for 8 frames
Qwiic / StemmaQT connector
IS31FL3731 chip
2.7 to 5.5V
Interface I2C
16x9 = 144 LEDs
PWM dimmable
RAM for 8 frames
Qwiic / StemmaQT connector
€7.77
BME688 - Gas/Temperature/Humidity/Pressure sensor, I2C / SPI, Qwiic / StemmaQT
Out-of-Stock
BME688 breakout
Temperature
Humidity
Athmospheric pressure
VoC Gas (CO)
Interface: SPI or I2C
Connector Qwiic / StemmaQT
€25.10
JST-SH 4 Pins connector – Horizontal – Qwiic / StemmaQT compatible
In Stock
JST-SH 4 pin connector
SMD / CMS male
Spacing 1mm
Horizontal
Qwiic / StemmaQT compatible
SMD / CMS male
Spacing 1mm
Horizontal
Qwiic / StemmaQT compatible
€0.83
Inertial Measurement Unit 9DOF - LSM6DSOX + LIS3MDL - Qwiic/StemmaQt
In Stock
Inertial Measurement Unit 9 DoF
LSM6DSOX + LIS3MDL
IMU
Accelerometer, Gyroscope, Magnetometer
9 Degrees of Freedom
LSM6DSOX + LIS3MDL
IMU
Accelerometer, Gyroscope, Magnetometer
9 Degrees of Freedom
€26.70
BME280 - Temp/Humidity/Pressure sensor - I2C, SPI - StemmaQT/Qwiic -
Out-of-Stock
Temperature - ±1°C accuracy
Atmospheric pressure - ±1 hPa absolute accuracy
Relative humidity - ±1% accuracy
Bus: I2C or SPI
5V or 3.3v compatible
StemmaQT/Qwiic connector
Atmospheric pressure - ±1 hPa absolute accuracy
Relative humidity - ±1% accuracy
Bus: I2C or SPI
5V or 3.3v compatible
StemmaQT/Qwiic connector
€20.69
Adafruit QT Py - ESP32-S2 WiFi - STEMMA QT
Out-of-Stock
ESP32 development board
USB-C
ESP32-S2 @ 240 Mhz
4 Mio Flash
2 Mio PSRAM
QT Py / Xiao Form-factor
USB-C
ESP32-S2 @ 240 Mhz
4 Mio Flash
2 Mio PSRAM
QT Py / Xiao Form-factor
€15.37
Adafruit QT Py - SAMD21 - STEMMA QT
In Stock
SAMD21 development board
USB-C
ATSAMD21E18 @ 48 Mhz
256 Kio Flash
32 Kio PSRAM
QT Py / Xiao Form-factor
USB-C
ATSAMD21E18 @ 48 Mhz
256 Kio Flash
32 Kio PSRAM
QT Py / Xiao Form-factor
€8.75
SHT45 : humidity & temperature precision sensor - Sensirion - I2C - Qwiic / StemmaQT
Out-of-Stock
Humidity & Temperature sensor
High precision sensor
5V & 3V3
Breakout
Qwiic / StemmaQT conn.
I2C addr: 0x44
Sensirion SHT45
High precision sensor
5V & 3V3
Breakout
Qwiic / StemmaQT conn.
I2C addr: 0x44
Sensirion SHT45
€15.73
SGP30 : Air quality sensor VOC / eCO2 - I2C - Qwiic / StemmaQt
In Stock
TVOC/eCO2 sensor, StemmaQt / Qwiic
SGP30 sensor, Air Quality
VoC gas
CO2 equivalent
Interface: I2C
SGP30 sensor, Air Quality
VoC gas
CO2 equivalent
Interface: I2C
€22.02
128x64 Monochrome OLED display - 1.3" - I2C - StemmaQT / Qwiic
Out-of-Stock
OLED Monochrome 1.3'' display
128x64 pixels
Graphical display
Interface: I2C
Alim: 3.3V / 5V
Logique: 3.3V / 5V
StemmaQt / Qwiic ready
128x64 pixels
Graphical display
Interface: I2C
Alim: 3.3V / 5V
Logique: 3.3V / 5V
StemmaQt / Qwiic ready
€24.99
CCS811 - air quality sensor COV & eCO2 - I2C - StemmaQT, Qwiic
Out-of-Stock
Breakout CCS811, gas sensor:
equivalent CO2 + VOC gaz
NTC thermistor
I2C interface
3.3v and 5V ready
StemmaQT / Qwiic ready
equivalent CO2 + VOC gaz
NTC thermistor
I2C interface
3.3v and 5V ready
StemmaQT / Qwiic ready
€24.14
ATtiny816 breakout with SeeSaw - StemmaQt / Qwiic
In Stock
Breakout ATtiny816
Multi-purpose GPIO expander (I/O, ADC, PWM, NeoPixel)
Firmware SeeSaw
Interface: I2C
Multi-purpose GPIO expander (I/O, ADC, PWM, NeoPixel)
Firmware SeeSaw
Interface: I2C
€6.70
GPIO+I2C+SPI extension via USB - FT232H
Out-of-Stock
FT232H from FTDI
multi-protocol serial interface (I2C, SPI, UART)
StemmaQT connector (I2C)
GPIOs
Add I2C, SPI, UART, GPIO on a computer.
multi-protocol serial interface (I2C, SPI, UART)
StemmaQT connector (I2C)
GPIOs
Add I2C, SPI, UART, GPIO on a computer.
€19.09
BMP280 Barometric pressure + Temperature + Altitude sensor - 3.3 et 5V
In Stock
BMP280 - Environmental sensor
Bus: I2C or SPI (Breakout and StemmaQT)
Temperature - ±1°C accuracy
Pressure - ±1 hPa absolute accuracy
5v and 3.3V compatible
Bus: I2C or SPI (Breakout and StemmaQT)
Temperature - ±1°C accuracy
Pressure - ±1 hPa absolute accuracy
5v and 3.3V compatible
€14.50
TSL2591 : Digital light sensor Lux/Luminosity
In Stock
Digital light sensor measuring light over a wide Lux range.
188 µLux to 88.000 Lux
I2C interface (Breakout & StemmaQT)
3.3V - 5V
188 µLux to 88.000 Lux
I2C interface (Breakout & StemmaQT)
3.3V - 5V
€8.69
PYBD Butterfly for Pyboard-D, breakout of X-Y position
Last items in stock
KIT PYBD adaptateur board (Pyboard-D)
Breakout of positions X & Y
1x Connecteur UEXT (I2C+SPI+UART)
1x StemmaQT / Qwiic (I2C)
2x Groove (I2C, UART)
3.3v & GND rails
UART & I2C connectors
Breakout of positions X & Y
1x Connecteur UEXT (I2C+SPI+UART)
1x StemmaQT / Qwiic (I2C)
2x Groove (I2C, UART)
3.3v & GND rails
UART & I2C connectors
€11.07
PA1010D Mini GPS - UART, I2C interface
Out-of-Stock
Mini GPS PA1010D (MTK3333 chipset)
Patch Antenna
GPS, GLONASS, GALILEO, QZSS
-165 dBm sensitivity
I2C, UART Interface
3.3V - 5V compatible
Qwiic / StemmaQT connector
Patch Antenna
GPS, GLONASS, GALILEO, QZSS
-165 dBm sensitivity
I2C, UART Interface
3.3V - 5V compatible
Qwiic / StemmaQT connector
€38.72