Breakout board
There are 84 products.
6x SMD breakout SOIC-12 and TSSOP-12
In Stock
6x SMD breakout PCB to solder your SMD components
SOIC-12
TSSOP-12
SOIC-12
TSSOP-12
€6.26
€3.19
€14.67
€6.23
TPL5111 - Timer Low Power
In Stock
Configurable Timer (with Potentiometer)
Actived once every 100ms a 2 hour
Reset Enabled (to restart the timer after job done).
Actived once every 100ms a 2 hour
Reset Enabled (to restart the timer after job done).
€7.87
ATSAMD09 Breakout with seesaw
In Stock
Wide range of capabilities breakout
3 x 12-bit ADC inputs
3 x 8-bit PWM outputs
7 x GPIO with selectable pullup or pulldown
1 x NeoPixel output (up to 340 pixels)
1 x EEPROM with 64 byte of NVM memory (handy for storing small access tokens or MAC addresses)
1 x Interrupt output that can be triggered by any of the accessories
2 x I2C address selection pins
1 x Activity LED
3 x 12-bit ADC inputs
3 x 8-bit PWM outputs
7 x GPIO with selectable pullup or pulldown
1 x NeoPixel output (up to 340 pixels)
1 x EEPROM with 64 byte of NVM memory (handy for storing small access tokens or MAC addresses)
1 x Interrupt output that can be triggered by any of the accessories
2 x I2C address selection pins
1 x Activity LED
€6.92
Carte Gamepad PiGrrl 2
In Stock
GamePad board with Gameboy's style.
2 Pads 4 boutons
Bouton Start/Select
Connexions bumpers
Prêt pour GPIO Raspberry Pi
2 Pads 4 boutons
Bouton Start/Select
Connexions bumpers
Prêt pour GPIO Raspberry Pi
€6.23
€19.81
€5.38
TCS34725 - RGB Color sensor + IR Filter + white LED
In Stock
TCS34725 Color sensor
RGB sensor
Infrared filter
White LED
I2C Interface
RGB sensor
Infrared filter
White LED
I2C Interface
€10.01
Electret Amplifier Microphone - MAX9814 with auto-gain
In Stock
Auto-Gain amplified electret microphone
MAX9814 amplifier
Microphone 20-20KHz
Auto gain (automatically adjust the gain).
MAX9814 amplifier
Microphone 20-20KHz
Auto gain (automatically adjust the gain).
€9.62
Audio FX sound board - Flash 2Mb
In Stock
Autonomous audio effect soundboard for audio files
Audio files WAV/OGG
2 Mb of Flash memory
MINI board (very small)
8x trigger
Autonomous
Audio files WAV/OGG
2 Mb of Flash memory
MINI board (very small)
8x trigger
Autonomous
€18.09
MPL115A2, pressure and temperature sensor, I2C
In Stock
Athmospheric Pressure sensor using MEM's technology
Pressure 50 kPa~115 kPa (sensitivity 0.05 kPa)
Altitude 0.3m (corresponding to 0.05 kPa)
Temperature
I2C Interface
Pressure 50 kPa~115 kPa (sensitivity 0.05 kPa)
Altitude 0.3m (corresponding to 0.05 kPa)
Temperature
I2C Interface
€12.05
MPRLS, Ported pressure sensor , 0-25 PSI , I2C
In Stock
Ported absolute pressure sensor
Pressure: 0~25 PSI (0~172 kPa, 0~1723 mBar)
Inox tube, 2.5mm diameter
I2C interface
Pressure: 0~25 PSI (0~172 kPa, 0~1723 mBar)
Inox tube, 2.5mm diameter
I2C interface
€37.68
€7.49
3x SMD breakout QFN-32 / TQFP-32
Last items in stock
3 x breakout board for QFN-32 or TQFP-32 components
€7.49
€7.49
2.2" color TFT - microSD - SPI -breakout
In Stock
Round Color TFT breakout
Screen surface: 2.2"
Visible diameter: 32mm (1.26")
Color: 16 bits
bus: SPI + Latch HC595
Ready 3.3 / 5V
Driver: ST7687S
Breakout
Screen surface: 2.2"
Visible diameter: 32mm (1.26")
Color: 16 bits
bus: SPI + Latch HC595
Ready 3.3 / 5V
Driver: ST7687S
Breakout
€18.15
Power control push-button with FET
Last items in stock
Power control with push button
Breakout Adafruit
3 to 14V DC
3A max
Kill pin (the project can shut down by itself)
Breakout Adafruit
3 to 14V DC
3A max
Kill pin (the project can shut down by itself)
€7.20
Extender / Terminator bus I2C, LTC4311
In Stock
Extender / acive terminator I2C bus, LTC4311
400 Khz
1.6V to 5.5V
Improve the transition
low noise
400 Khz
1.6V to 5.5V
Improve the transition
low noise
€13.01
Bidirectional I2C isolator, ISO1540
In Stock
I2C isolator, ISO1540 breakout
Bidirectional
Level shifter
1 Mhz
3-5V compatible
Stemma QT, Qwiic compatible
Bidirectional
Level shifter
1 Mhz
3-5V compatible
Stemma QT, Qwiic compatible
€10.29