Environnemental (Press. Temp. Hum. Gas)
There are 60 products.
MOD-BME280 - Temperature/Humidity/Pressure sensor
In Stock
Temperature - ±1°C accuracy
Athmospheric pressure - ±1 hPa absolute accuracy
Relative Humidity - ±1% accuracy
I2C (only)
1.8V to 3.3V
Athmospheric pressure - ±1 hPa absolute accuracy
Relative Humidity - ±1% accuracy
I2C (only)
1.8V to 3.3V
€8.72
TSL2591 : Digital light sensor Lux/Luminosity
Last items in stock
Digital light sensor measuring light over a wide Lux range.
188 µLux to 88.000 Lux
I2C interface (Breakout & StemmaQT)
3.3V - 5V
188 µLux to 88.000 Lux
I2C interface (Breakout & StemmaQT)
3.3V - 5V
€8.69
Gravity : VEML6075 UV sensor, I2C
In Stock
Ultraviolet Sensor, Gravity Interface
VEML6075 sensor
UVA (350 à 375nm)
UVB (315 à 340nm)
UV-I (UltraViolet Index) in visible light
3.3 to 5V
I2C interface
VEML6075 sensor
UVA (350 à 375nm)
UVB (315 à 340nm)
UV-I (UltraViolet Index) in visible light
3.3 to 5V
I2C interface
€8.48
M5Stack: Ambiant light sensor (BH1750FVI-TR), Grove, I2C
In Stock
DLight - Ambiant light sensor
1 - 65535 Lux
BH1750FVI : high resolution Lux sensor
I2C Interface
Grove connector
U136
1 - 65535 Lux
BH1750FVI : high resolution Lux sensor
I2C Interface
Grove connector
U136
€7.80
WATERPROOF DS18B20 temperature sensor + Extra
In Stock
Digital temperature sensor (1wire) waterproof, 0.5°C resolution from -10°C to +85°C. Temperature range -55°C to 125°C
€7.37
Gravity: Soil moisture reader, Capacitve, Analog output
In Stock
Capacitive Soil Moisture (humidity)
Analog output
Corrosion resistant
Gravity interface
Analog output
Corrosion resistant
Gravity interface
€7.27
Gravity: DHT11 Temperature & Humidity Sensor For Arduino
In Stock
Gravity : relative humidity and temperature sensor
20 to 80 % Hrel
0 to 50 C (+/- 2 C)
20 to 80 % Hrel
0 to 50 C (+/- 2 C)
€7.22
[T] - MCP9808 - I2C precision Temperature Sensor
In Stock
High precision I2C temperature sensor, I2C interface
€6.78
TMP36 - analog temperature sensor
In Stock
The TMP36 is a very popular and easy-to-use temperature sensor
€2.50
€1.28
Dissolved oxygen sensor - Gravity, analogic output
Out-of-Stock
Dissolved Oxygen sensor
Power: 5V - 3.3V
Interface: Analog 0-3.0V
Required special usage handling
Required NaOH solution
SEN0237-A
Power: 5V - 3.3V
Interface: Analog 0-3.0V
Required special usage handling
Required NaOH solution
SEN0237-A
€165.17
ORP Sensor (Oxidation-Reduction Potential) gravity, analog
Out-of-Stock
Oxidation-Reduction Potential sensor
Power: 5V
Range: -2000 mV to +2000 mV
Accuracy: +/- 10mV
Output: analog
SEN0165
Power: 5V
Range: -2000 mV to +2000 mV
Accuracy: +/- 10mV
Output: analog
SEN0165
€95.59
CO2 Traffic Light Plus sensor - Wifi
Out-of-Stock
CO2 Traffic Light - WiFi version
CO2 measurement
pre-installed firmware
PLUS version designed for Maker
Interface: USB, WIFI (ATWINC1500)
CO2 measurement
pre-installed firmware
PLUS version designed for Maker
Interface: USB, WIFI (ATWINC1500)
€86.14
Electrical conductivity of aqueous solutions (K 1, ECMeter) gravity, analog
Out-of-Stock
Kit for Aqueous Electrical Conductivity measurement
ECMeter K=1
Supply: 3 - 5V
Output: Analog Output 0-3.4V
Detection range: 0 to 15mS/cm
DFR300 (v2)
ECMeter K=1
Supply: 3 - 5V
Output: Analog Output 0-3.4V
Detection range: 0 to 15mS/cm
DFR300 (v2)
€72.20
Gravity: Analog pH Sensor / Meter Kit For Arduino, pH buffer solution, Analog
Out-of-Stock
Gravity : Measurement of pH of a solution
0 to 14 pH (+/- 0.1 pH)
Gain adjustment pot. (calibration)
Analog output (> 3.3v)
Solution de titrage pH 4.0, 7.0
Power supply : 3.3~5.5V
0 to 14 pH (+/- 0.1 pH)
Gain adjustment pot. (calibration)
Analog output (> 3.3v)
Solution de titrage pH 4.0, 7.0
Power supply : 3.3~5.5V
€47.53
Air quality sensor PM2.5 (PM5003) and breadboard adapter
Out-of-Stock
Air quality sensor:
PM2.5 (PMS5003)
2.5 micron and smaller particles
Power 5V
Logic 3.3V
TX data pin
PM2.5 (PMS5003)
2.5 micron and smaller particles
Power 5V
Logic 3.3V
TX data pin
€46.40
AM2315 - temperature and humidity sensor
Out-of-Stock
AM2315 - a weatherproof humidity and temperature sensor
I2C Interface
Humidity sensor
Temperature sensor DS18B20
Inside a case
I2C Interface
Humidity sensor
Temperature sensor DS18B20
Inside a case
€37.43
Gravity: Analog pH Sensor / Meter Kit For Arduino
Out-of-Stock
Gravity : Measurement of pH of a solution
0 to 14 pH (+/- 0.1 pH)
Gain adjustment pot. (calibration)
Analog output (> 3.3v)
Power supply : 5V
0 to 14 pH (+/- 0.1 pH)
Gain adjustment pot. (calibration)
Analog output (> 3.3v)
Power supply : 5V
€35.70
BME680 - Gas/Temperature/Humidity/Pressure sensor
Out-of-Stock
Temperature
Humidity
Barometric pressure
VOC Gaz
Interface: SPI or I2C
Connector Stemma QT
Humidity
Barometric pressure
VOC Gaz
Interface: SPI or I2C
Connector Stemma QT
€26.23
BME688 - Gas/Temperature/Humidity/Pressure sensor, I2C / SPI, Qwiic / StemmaQT
Out-of-Stock
BME688 breakout
Temperature
Humidity
Athmospheric pressure
VoC Gas (CO)
Interface: SPI or I2C
Connector Qwiic / StemmaQT
€25.10
CCS811 - air quality sensor COV & eCO2 - I2C - StemmaQT, Qwiic
Out-of-Stock
Breakout CCS811, gas sensor:
equivalent CO2 + VOC gaz
NTC thermistor
I2C interface
3.3v and 5V ready
StemmaQT / Qwiic ready
equivalent CO2 + VOC gaz
NTC thermistor
I2C interface
3.3v and 5V ready
StemmaQT / Qwiic ready
€24.14