Search results
There are 217 products.
Feather M0 Express - ATSAMD21 Cortex M0 - CircuitPython
In Stock
Cortex M0+ microcontroler compatible with Arduino IDE and MicroPython
256 Kb of FLASH
32 Kb of RAM
2 MB of EXTRA FLASH in SPI
One Neopixel LED
256 Kb of FLASH
32 Kb of RAM
2 MB of EXTRA FLASH in SPI
One Neopixel LED
€25.87
[T] - ECG-EKG/EMG shield for Arduino
In Stock
Shield electrocardiography, electromyography for Arduino
€25.88
€26.08
Motor Hat for Raspberry-Pi (DC motor and stepper)
Out-of-Stock
HAT control driver continuous motor and stepper motor
€26.14
Raspberry Pi Build HAT - LEGO Robotics For Raspberry Pi
In Stock
Lego Build Hat pour Raspberry-Pi
LEGO® Education SPIKE, LEGO® MINDSTORMS
4x LPF2 connectors
Jack 2.1mm
7.5V Battery Pack or 8V DC PSU
LEGO® Education SPIKE, LEGO® MINDSTORMS
4x LPF2 connectors
Jack 2.1mm
7.5V Battery Pack or 8V DC PSU
€26.95
HAT PoE+ for Raspberry Pi
Out-of-Stock
Power up the Raspberry-Pi from an Ethernet cable
Pi 3 B+ / Pi 4
15W max. (5V, 3A)
Protected against over-current, over-voltage, open circuit, overheat
Ethernet cable: 100m max.
Ventilator controled with Micro-Controler
Pi 3 B+ / Pi 4
15W max. (5V, 3A)
Protected against over-current, over-voltage, open circuit, overheat
Ethernet cable: 100m max.
Ventilator controled with Micro-Controler
€26.95
5V 5A regulator, step down, D24V50F5
In Stock
D27V50F5 Switching DC-DC regulator, 5V 5A, Step-Down
Output voltage: 5V (and possibility to configure lower)
Input voltage: 38V max
Output current: ~5 A max
Output voltage: 5V (and possibility to configure lower)
Input voltage: 38V max
Output current: ~5 A max
€28.44
Ludik-Hat - a HAT designed to discover electronics and programming with Raspberry-Pi
In Stock
A HAT to discover electronic and programming on the Raspberry-Pi
Experimentation center for Raspberry-Pi
Ready to use
No soldering required
Experimentation center for Raspberry-Pi
Ready to use
No soldering required
€29.31
Metro M0 Express - ATSAMD21G18
In Stock
ATSAMD21G18 @ 48MHz
3.3V Logic
FLASH: 256 Kb
RAM: 32Kb
2 Mb FLASH SPI
USB bootloader
Ready for Arduino and MicroPython (CircuitPython)
3.3V Logic
FLASH: 256 Kb
RAM: 32Kb
2 Mb FLASH SPI
USB bootloader
Ready for Arduino and MicroPython (CircuitPython)
€29.96
Feather M4 Express - ATSAMD51 Cortex M4-CircuitPython
Last items in stock
Arduino IDE and CircuitPython compatible Cortex M4 microcontroller
ATSAMD51 Cortex M4 @ 120Mhz
512 KB of FLASH
192 KB of RAM
2 MB of FLASH EXTRA in SPI
A Neopixel LED
21 GPIO (16 PWM)
6 analog input - 12 bit (0-4095)
2 analog output - 12 bit (0-4095)
RTC, AES
ATSAMD51 Cortex M4 @ 120Mhz
512 KB of FLASH
192 KB of RAM
2 MB of FLASH EXTRA in SPI
A Neopixel LED
21 GPIO (16 PWM)
6 analog input - 12 bit (0-4095)
2 analog output - 12 bit (0-4095)
RTC, AES
€29.98
[T] - RGB LCD Shield - 2 pins - NEGATIVE DISPLAY + Keypad
Last items in stock
RGB Shield display 2x16 characters + keypad 5 buttons - only 2 pins! - negative display
€30.19
2.2" color TFT - microSD - SPI - EYESPI breakout
In Stock
Color TFT breakout
Diagonal: 2.2"
Coulor: 18 bits (262144 shades)
Connector: microSD
bus: SPI
Ready 3.3 / 5V
Driver: ILI9341/ILI9340 or compatible
Breakout EYESPI connector
Diagonal: 2.2"
Coulor: 18 bits (262144 shades)
Connector: microSD
bus: SPI
Ready 3.3 / 5V
Driver: ILI9341/ILI9340 or compatible
Breakout EYESPI connector
€30.19
Raspberry Pi 3 A+
In Stock
PURCHASE MAX 10 per person per month during the global component out of stock period - if you need more parts, contact us by EMAILThe Raspberry Pi 3 A+
Quad cores, 1.4 Ghz, 64 bits
512 Mb of RAM
WiFi 2.4 & 5 Ghz
Bluetooth 4.2
1x USB Port
GPIO 40 pins
Camera and Display port
HDMI output
Quad cores, 1.4 Ghz, 64 bits
512 Mb of RAM
WiFi 2.4 & 5 Ghz
Bluetooth 4.2
1x USB Port
GPIO 40 pins
Camera and Display port
HDMI output
€30.25
Romeo v2 - Arduino compatible + robotic controler
In Stock
Robotic + microcontroler board
32u4 - Arduino Leonardo compatible
Motor: 6-23V DC
2x DC Motor (2A) or 1 Stepper
XBee connector
APC220 connector
microUSB connector
Also known Romeo V2 / DFR0225
32u4 - Arduino Leonardo compatible
Motor: 6-23V DC
2x DC Motor (2A) or 1 Stepper
XBee connector
APC220 connector
microUSB connector
Also known Romeo V2 / DFR0225
€30.46
€30.61
RFM69HCW Transceiver Radio Breakout - 433 MHz - RadioFruit
Out-of-Stock
RFM69HCW at 433Mhz
SX1231 based module with SPI interface
50mA to 150mA
~30mA during active radio listening.
Packet radio with ready-to-go Arduino libraries
Uses the amateur or license-free ISM band (ITU "Europe" license-free ISM)
Use a simple wire antenna or spot for uFL or SMA radio connector
500m to 2Km, even 5 (depending on the Antenna)
SX1231 based module with SPI interface
50mA to 150mA
~30mA during active radio listening.
Packet radio with ready-to-go Arduino libraries
Uses the amateur or license-free ISM band (ITU "Europe" license-free ISM)
Use a simple wire antenna or spot for uFL or SMA radio connector
500m to 2Km, even 5 (depending on the Antenna)
€31.16
Feather nRF52 Bluefruit LE - nRF52832
Last items in stock
nRF52 Bluetooth LE Feather - nRF52832
ARM Cortex M4F @ 64MHz
512KB flash
64KB SRAM
nRF52832 - Bluetooth Low Energy, 2.4GHz
1.7v to 3.3v
19 GPIO, 8 x 12-bit ADC, up to 12 PWM outputs
Optional SWD connector for debugging
ARM Cortex M4F @ 64MHz
512KB flash
64KB SRAM
nRF52832 - Bluetooth Low Energy, 2.4GHz
1.7v to 3.3v
19 GPIO, 8 x 12-bit ADC, up to 12 PWM outputs
Optional SWD connector for debugging
€31.16
Feather 32U4 + RFM69HCW radio transponder - 433 MHz - RadioFruit
In Stock
ATmega32u4 @ 8MHz
3.3V logic/powering (peak at 500mA)
7x PWM pins
10x Analog Input
LiPo charger (100mA)
RFM69HCW @ 433Mhz
SX1231 module (SPI interface)
50mA to 150mA
~30mA while active listening
Use amateur ISM band (ITU "Europe" license-free ISM)
Antenna or solder a µFl connector
350m or more (depending of obfuscation in the line of sight)
3.3V logic/powering (peak at 500mA)
7x PWM pins
10x Analog Input
LiPo charger (100mA)
RFM69HCW @ 433Mhz
SX1231 module (SPI interface)
50mA to 150mA
~30mA while active listening
Use amateur ISM band (ITU "Europe" license-free ISM)
Antenna or solder a µFl connector
350m or more (depending of obfuscation in the line of sight)
€31.16
[T] - Pinguino PIC 32 - carte dev. PIC32MX440F256H
Last items in stock
This product is being translated
Pinguino, une plateforme de développement style "Arduino" mais nettement plus puissante.
Pinguino, une plateforme de développement style "Arduino" mais nettement plus puissante.
€31.38
RFM69HCW Transceiver Radio Breakout - 433 MHz - RadioFruit
In Stock
ATmega32u4 @ 8MHz
3.3V logic/powering (peak at 500mA)
7x PWM pins
10x Analog Input
LiPo charger (100mA)
RFM69HCW @ 868Mhz
SX1231 module (SPI interface)
50mA to 150mA
~30mA while active listening
Use amateur ISM band (ITU "Europe" license-free ISM)
Antenna or solder a µFl connector
350m or more (depending of obfuscation in the line of sight)
3.3V logic/powering (peak at 500mA)
7x PWM pins
10x Analog Input
LiPo charger (100mA)
RFM69HCW @ 868Mhz
SX1231 module (SPI interface)
50mA to 150mA
~30mA while active listening
Use amateur ISM band (ITU "Europe" license-free ISM)
Antenna or solder a µFl connector
350m or more (depending of obfuscation in the line of sight)
€31.40
MOD-VGA : 3.3V Gameduino alike board
Out-of-Stock
Gameduino alike board
Variant board made by Olimex with PS2 connector
3V only (not 5V tolerant)
Arduino connector
UEXT connector
Variant board made by Olimex with PS2 connector
3V only (not 5V tolerant)
Arduino connector
UEXT connector
€33.11