List of products by brand Adafruit
There are 276 products.
€23.20
GPIO reference board for Raspberry-Pi and Pi Zero
In Stock
Identify the GPIOs of your Pi quickly with this reference card
€3.15
Graphic OLED display 128x128 -16 bits colors
In Stock
OLED RGB graphical display
1.5" diagonal
128 (RGB) x 128 pixels
16 bits colors
SPI bus
microSD connector
1.5" diagonal
128 (RGB) x 128 pixels
16 bits colors
SPI bus
microSD connector
€48.34
Graphic OLED display 128x64 Monochrome - 2.42"
In Stock
Monochrome OLED Display
128x64 OLED - 2.42''
I2C or SPI or 8 bits data
Graphic display
SSD1305 controler
128x64 OLED - 2.42''
I2C or SPI or 8 bits data
Graphic display
SSD1305 controler
€48.34
IDC Connector Breakout Helper 2x20
In Stock
2x20 for Raspberry-Pi
IDC format
Suited for Breadboard and prototyping board
IDC format
Suited for Breadboard and prototyping board
€3.32
Inertial Measurement Unit 9DOF - LSM6DSOX + LIS3MDL - Qwiic/StemmaQt
In Stock
Inertial Measurement Unit 9 DoF
LSM6DSOX + LIS3MDL
IMU
Accelerometer, Gyroscope, Magnetometer
9 Degrees of Freedom
LSM6DSOX + LIS3MDL
IMU
Accelerometer, Gyroscope, Magnetometer
9 Degrees of Freedom
€26.70
IS31FL3731 - I2C LED matrix controler, 16x9 CharliePlexing, PWM, Qwiic/StemmaQT
In Stock
LED charlieplexing driver
IS31FL3731 chip
2.7 to 5.5V
Interface I2C
16x9 = 144 LEDs
PWM dimmable
RAM for 8 frames
Qwiic / StemmaQT connector
IS31FL3731 chip
2.7 to 5.5V
Interface I2C
16x9 = 144 LEDs
PWM dimmable
RAM for 8 frames
Qwiic / StemmaQT connector
€7.77
ItsyBitsy M0 Express - ATSAMD21 Cortex M0 - CircuitPython
In Stock
Cortex M0+ microcontoler compatible with Arduino IDE, CircuitPython, MicroPython
ATSAMD21G8 Cortex M0+ @ 48 Mhz
256 Kb FLASH
32 Kb RAM
2 MB external FLASH in SPI
One Dotstar LED
23 GPIO (13 PWM)
11 Analog Input - 12 bits (0-4095)
1 Analog ouput - 10 bits (0-1023)
RTC
ATSAMD21G8 Cortex M0+ @ 48 Mhz
256 Kb FLASH
32 Kb RAM
2 MB external FLASH in SPI
One Dotstar LED
23 GPIO (13 PWM)
11 Analog Input - 12 bits (0-4095)
1 Analog ouput - 10 bits (0-1023)
RTC
€13.01
€8.28
JST PH 3-pin cable - 100mm - Female/Female
Last items in stock
JST PH cable
3-pin
Female / Female
100mm
3-pin
Female / Female
100mm
€0.91
JST-SH 4 poles cable 50mm - Stemma QT, Qwiic
In Stock
Wiring cable 50mm
JST-SH 4 poles, 1mm
StemmaQT
Qwiic
JST-SH 4 poles, 1mm
StemmaQT
Qwiic
€1.32
JST-SH 4 poles wiring - alligator - Stemma QT, Qwiic
Last items in stock
Wiring cable - alligator clips
JST-SH 4 Pins, 1mm
StemmaQT (Adafruit) compatible
Qwiic (SparkFun) compatible
JST-SH 4 Pins, 1mm
StemmaQT (Adafruit) compatible
Qwiic (SparkFun) compatible
€3.85
Level Shifter - 8 channels - Bi-Directionnal
In Stock
5V <-> 3V to 8-channel bidirectional Logic converter
€9.68
LSM9DS1 - 9 DOF - Gyro/Accel/Mag + Temp breakout
Last items in stock
9 degrees of freedom LSM9DS1 Gyroscope
3-Axis accelerometer
3-Axis magnetometer
3-Axis gyroscope
Temperature
I2C and SPI interface
3.3 and 5V Logic
3-Axis accelerometer
3-Axis magnetometer
3-Axis gyroscope
Temperature
I2C and SPI interface
3.3 and 5V Logic
€50.54
Matrice LED CharliePlexing - 9x16 LEDs - Rouge
In Stock
9x16 LEDs matrix for CharliePlexing operation
Height: 9 LEDs
Wide: 16 LEDs
RED
Height: 9 LEDs
Wide: 16 LEDs
RED
€7.77
MCP4725 - digital/analog converter (DAC) - 12 bits - I2C interface
In Stock
Numeric to analog converter for Microcontroler
12 bits résolution
I2C Interface
Breakout & Qwiic/StemmaQT con.
A true analog output!!!
12 bits résolution
I2C Interface
Breakout & Qwiic/StemmaQT con.
A true analog output!!!
€6.24
Metro M0 Express - ATSAMD21G18
In Stock
ATSAMD21G18 @ 48MHz
3.3V Logic
FLASH: 256 Kb
RAM: 32Kb
2 Mb FLASH SPI
USB bootloader
Ready for Arduino and MicroPython (CircuitPython)
3.3V Logic
FLASH: 256 Kb
RAM: 32Kb
2 Mb FLASH SPI
USB bootloader
Ready for Arduino and MicroPython (CircuitPython)
€29.96
€2.42
€19.81
€2.42
MPL115A2, pressure and temperature sensor, I2C
In Stock
Athmospheric Pressure sensor using MEM's technology
Pressure 50 kPa~115 kPa (sensitivity 0.05 kPa)
Altitude 0.3m (corresponding to 0.05 kPa)
Temperature
I2C Interface
Pressure 50 kPa~115 kPa (sensitivity 0.05 kPa)
Altitude 0.3m (corresponding to 0.05 kPa)
Temperature
I2C Interface
€12.05