Motor controler
There are 36 products.
Gravity: 2x1.2A DC Motor Driver with Gravity Connector (TB6612FNG)
In Stock
Gravity : Continuous motor controller
2 motors (in both ways)
Logic : 2.7 to 5V
Motor : 2.5 to 12V
Current : 1.2A (2A in impulsion)
2 motors (in both ways)
Logic : 2.7 to 5V
Motor : 2.5 to 12V
Current : 1.2A (2A in impulsion)
€9.56
DRV8833 - Dual DC motor controler, 1.2A, 2.7 to 10.8V
In Stock
DRV8833 controler - double H-Bridge
2 DC Motors
1.2A (2A current peak)
2.7 to 10.8V
2 DC Motors
1.2A (2A current peak)
2.7 to 10.8V
€10.15
DRV2605L - haptic/Vibra motor controller
In Stock
DRV2605L motor controller
Buzzer & vibration motors, Haptic human/machine interface
Various effects (ramp, click, ...)
3 to 5V DC
I2C interface
Buzzer & vibration motors, Haptic human/machine interface
Various effects (ramp, click, ...)
3 to 5V DC
I2C interface
€9.62
Drive up to 2 motors with the DRV8835 for Raspberry Pi
In Stock
Motor controler for Raspberry-Pi
2 motors
1.5 to 11V
1.2A (1.5A peak)
DRV8835 controler
2 motors
1.5 to 11V
1.2A (1.5A peak)
DRV8835 controler
€9.90
Double contrôleur moteur MC33926, 3A, 5-28V
In Stock
2 direct current motors
5 to 28 Volts
3 Amps continuous load
5 Amps peak
Current Sense 0.525 V/A
5 to 28 Volts
3 Amps continuous load
5 Amps peak
Current Sense 0.525 V/A
€68.96
Adafruit PWM Servo Controller 16 channels 12 bit - I2C interface - PCA9685
In Stock
Allows to control up to 16 servo motors (or LEDs) in PWM. Can be connected in series to obtain 32,64,128, ... channels and up to 62 x 16 channels with only 2 interface wires!
€18.91
Adafruit CRICKIT for micro:bit
Last items in stock
Crickit - Creative Robotics & Interactive Construction Kit
for Micro:bit
MakeCode and Arduino support
4x Servo Motor driver -OR- Analog output (PWM)
2x DC motor driver (with PWM control)
4x high curent output (relay, solenoid, etc)
4x capacitive touch entry
8x digital I/O (or analog inputs)
1x LED NeoPixels 5V driver (wired on pin #16)
1x Amplified Audio output (wired on pin #1)
for Micro:bit
MakeCode and Arduino support
4x Servo Motor driver -OR- Analog output (PWM)
2x DC motor driver (with PWM control)
4x high curent output (relay, solenoid, etc)
4x capacitive touch entry
8x digital I/O (or analog inputs)
1x LED NeoPixels 5V driver (wired on pin #16)
1x Amplified Audio output (wired on pin #1)
€36.24
Adafruit CRICKIT for Feather
In Stock
Crickit - Creative Robotics & Interactive Construction Kit
for all the les Feather
MakeCode, Arduino, CircuitPython
interface I2C
4x Servo Motor controler -OR- Analog
2x DC motor controler (PWM)
4x Power output (relay, solenoid, etc)
4x Capacitive input
8x digital I/O (or analog input)
1x NeoPixel LED controler
1x Audio amplifier (selectable pin)
for all the les Feather
MakeCode, Arduino, CircuitPython
interface I2C
4x Servo Motor controler -OR- Analog
2x DC motor controler (PWM)
4x Power output (relay, solenoid, etc)
4x Capacitive input
8x digital I/O (or analog input)
1x NeoPixel LED controler
1x Audio amplifier (selectable pin)
€36.24
A4988 Stepper motor controler
In Stock
Step-by-step motor controller A4988 - micro-step
Motor voltage: 8 à 32V
Motor current: 1.2A (2.3A in peak)
Micro-stepper: 1/16 of step max.
Current limiter
Logic: 3.3 et 5V
Motor voltage: 8 à 32V
Motor current: 1.2A (2.3A in peak)
Micro-stepper: 1/16 of step max.
Current limiter
Logic: 3.3 et 5V
€14.24
TMC2208 - Silent stepper Motor controler
Out-of-Stock
Step motor controler TMC2208
A4988 compatible
Silent Stepstick
MicroStepping: 1/256 step max
Motor voltage: 5.5V à 36V
Motor current: 1.2A per coil (2A peak)
Logic level 3.3 and 5V
Current limiter
A4988 compatible
Silent Stepstick
MicroStepping: 1/256 step max
Motor voltage: 5.5V à 36V
Motor current: 1.2A per coil (2A peak)
Logic level 3.3 and 5V
Current limiter
€9.71
PyBoard Motor Skin KIT
Out-of-Stock
Motor expansion board for MicroPython
Ultrasonic detector detector
5V regulator
L293D based dual H-Bridge based motor
Ultrasonic detector detector
5V regulator
L293D based dual H-Bridge based motor
€25.47
€14.01
Motor Hat for Raspberry-Pi (DC motor and stepper)
Out-of-Stock
HAT control driver continuous motor and stepper motor
€26.14
HAT PWM / Servo, 16 channels for Raspberry-Pi
Out-of-Stock
HAT PWM / Servo - 16 channels - for Raspberry Pi
€22.37
Dual H-bridges - TB6612 - 4.5 to 13.5V @ 1.2A
Out-of-Stock
TB6612 Dual H-bridge
2.7 to 5.5V logic
1.2A per channel
4.5V to 13.5V Motor
4 channels
1 stepper motor
or 2 continuous motors
or 4 solenoids
2.7 to 5.5V logic
1.2A per channel
4.5V to 13.5V Motor
4 channels
1 stepper motor
or 2 continuous motors
or 4 solenoids
€8.78