Motor controler - electronic to propel and control motors

Motor controler

The microcontroler usually needs some help when they need to control motors. This is because the motors are consuming lot of current (or power) and that microcontroler are not taillored for such amount of current.

Thankfuly, they are Motor Controlers! They can be as simple as L293, L298 or more advanced board, the motor controler are there to ease your life by taking care about all the stuff related to motor power control.

With thoses board and breakouts you will ba able to tame DC motors, stepper motors, servo motors, etc. All you need to motorise your project and made it autonomous in our human world.

MAESTRO Mini - USB Servo controler 24 channels
Last items in stock
USB Servo controller for servo motor
Maestro Mini from Pololu
24 channels
8 KB memory (3000 servo positions)
Configuration Software, Autonomous script, USB-Serial script, TTL serial
Arduino library & SDK
€52.51
Tic T500 USB Multi-Interface Stepper Motor Controller
In Stock
Tic T500 USB Multi-Interface Stepper Motor Controller
USB, Serial, I2C, Analog, Quadrature encoder, hobby radio control
4.5 to 35V
1.5A (2.5 with forced air)
Connector soldered
POL-3134
€47.55
Adafruit CRICKIT for Feather
In Stock
Crickit - Creative Robotics & Interactive Construction Kit
for all the les Feather
MakeCode, Arduino, CircuitPython
interface I2C
4x Servo Motor controler -OR- Analog
2x DC motor controler (PWM)
4x Power output (relay, solenoid, etc)
4x Capacitive input
8x digital I/O (or analog input)
1x NeoPixel LED controler
1x Audio amplifier (selectable pin)
€36.24
Adafruit CRICKIT for micro:bit
Last items in stock
Crickit - Creative Robotics & Interactive Construction Kit
for Micro:bit
MakeCode and Arduino support
4x Servo Motor driver -OR- Analog output (PWM)
2x DC motor driver (with PWM control)
4x high curent output (relay, solenoid, etc)
4x capacitive touch entry
8x digital I/O (or analog inputs)
1x LED NeoPixels 5V driver (wired on pin #16)
1x Amplified Audio output (wired on pin #1)
€36.24
MAESTRO Mini - USB Servo controler 12 channels
In Stock
USB Servo controller for servo motor
Maestro Mini from Pololu
12 channels
8 KB memory (3000 servo positions)
Configuration Software, Autonomous script, USB-Serial script, TTL serial
Arduino library & SDK
€33.64
Robotic controler for Raspberry-Pi
Last items in stock
Robotic HAT Raspberry - OR - Standalone Robotics Platform 
A-Star 32U4 LV Robot Controller with Raspberry-Pi Bridge
programmable module
motor controler for robotic project
Assembled 
€32.23
Stepper controler, 36v4, 4A
In Stock
Stepper controleur 36v4 - micro-stepping
MicroStepping: 1/256 step
Motor voltage: 8 - 50V
Logic: 1.8V, 3.3V & 5.8V
Motor current: 4A Max per coil (6A peak en pointe)
Configurable via SPI
STEP/DIR control (or full control via SPI)
Based on DRV8711 + external MOSFET
€32.13
Romeo v2 - Arduino compatible + robotic controler
In Stock
Robotic + microcontroler board
32u4 - Arduino Leonardo compatible
Motor: 6-23V DC
2x DC Motor (2A) or 1 Stepper
XBee connector
APC220 connector
microUSB connector
Also known Romeo V2 / DFR0225
€30.46
MAESTRO Micro - USB Servo controler 6 channels
In Stock
USB Servo controller for servo motor
Maestro Micro from Pololu
6 channels
1 KB memory
Configuration Software, Autonomous script, USB-Serial script, TTL serial
Arduino library & SDK
€26.77
Motor board for Romi Robot
In Stock
Motor controller for Romi robot
Motor driver: DRV8838 (2.5 to 10.8V, 1.8A per channel)
Power distribution
STEP-DOWN regulator (2.5 @ 5V, 3.3V)
€19.95
A4988 Stepper motor controler
In Stock
Step-by-step motor controller A4988 - micro-step
Motor voltage: 8 à 32V
Motor current: 1.2A (2.3A in peak)
Micro-stepper: 1/16 of step max.
Current limiter
Logic: 3.3 et 5V
€14.24