List of products by brand Adafruit
There are 283 products.
Adafruit CRICKIT for micro:bit
Last items in stock
Crickit - Creative Robotics & Interactive Construction Kit
for Micro:bit
MakeCode and Arduino support
4x Servo Motor driver -OR- Analog output (PWM)
2x DC motor driver (with PWM control)
4x high curent output (relay, solenoid, etc)
4x capacitive touch entry
8x digital I/O (or analog inputs)
1x LED NeoPixels 5V driver (wired on pin #16)
1x Amplified Audio output (wired on pin #1)
for Micro:bit
MakeCode and Arduino support
4x Servo Motor driver -OR- Analog output (PWM)
2x DC motor driver (with PWM control)
4x high curent output (relay, solenoid, etc)
4x capacitive touch entry
8x digital I/O (or analog inputs)
1x LED NeoPixels 5V driver (wired on pin #16)
1x Amplified Audio output (wired on pin #1)
€36.24
Adafruit PWM Servo Controller 16 channels 12 bit - I2C interface - PCA9685
In Stock
Allows to control up to 16 servo motors (or LEDs) in PWM. Can be connected in series to obtain 32,64,128, ... channels and up to 62 x 16 channels with only 2 interface wires!
€18.91
Adafruit QT Py - SAMD21 - STEMMA QT
In Stock
SAMD21 development board
USB-C
ATSAMD21E18 @ 48 Mhz
256 Kio Flash
32 Kio PSRAM
QT Py / Xiao Form-factor
USB-C
ATSAMD21E18 @ 48 Mhz
256 Kio Flash
32 Kio PSRAM
QT Py / Xiao Form-factor
€8.75
€6.36
Adalogger FeatherWing - PCF8523 RTC + SD Add-on
Last items in stock
Adalogger FeatherWing
Real Time Clock (RTC) PCF8523
microSD connector
Feather Extension board
Real Time Clock (RTC) PCF8523
microSD connector
Feather Extension board
€10.59
€38.37
Arduino ATWINC1500 WiFi Shield with PCB Antenna
In Stock
WiFi Shield for Arduino UNO
ATWinc1500 WiFi
PCB antenna
Arduino Shield
FCC-certified d'Atmel
ATWinc1500 WiFi
PCB antenna
Arduino Shield
FCC-certified d'Atmel
€31.25
Arduino ATWINC1500 WiFi Shield with uFl connector
Last items in stock
WiFi Shield for Arduino UNO
ATWinc1500 WiFi
µFl connector for external antenna
Arduino Shield
FCC-certified d'Atmel
ATWinc1500 WiFi
µFl connector for external antenna
Arduino Shield
FCC-certified d'Atmel
€31.25
ATSAMD09 Breakout with seesaw
Last items in stock
Wide range of capabilities breakout
3 x 12-bit ADC inputs
3 x 8-bit PWM outputs
7 x GPIO with selectable pullup or pulldown
1 x NeoPixel output (up to 340 pixels)
1 x EEPROM with 64 byte of NVM memory (handy for storing small access tokens or MAC addresses)
1 x Interrupt output that can be triggered by any of the accessories
2 x I2C address selection pins
1 x Activity LED
3 x 12-bit ADC inputs
3 x 8-bit PWM outputs
7 x GPIO with selectable pullup or pulldown
1 x NeoPixel output (up to 340 pixels)
1 x EEPROM with 64 byte of NVM memory (handy for storing small access tokens or MAC addresses)
1 x Interrupt output that can be triggered by any of the accessories
2 x I2C address selection pins
1 x Activity LED
€6.92
ATtiny816 breakout with SeeSaw - StemmaQt / Qwiic
In Stock
Breakout ATtiny816
Multi-purpose GPIO expander (I/O, ADC, PWM, NeoPixel)
Firmware SeeSaw
Interface: I2C
Multi-purpose GPIO expander (I/O, ADC, PWM, NeoPixel)
Firmware SeeSaw
Interface: I2C
€6.70
ATWINC1500 WiFi Breakout
Last items in stock
FCC-certified WiFi Breakout from Atmel/MicroChip
for MicroControler
for MicroControler
€31.25
Audio FX sound board - Flash 2Mb
In Stock
Autonomous audio effect soundboard for audio files
Audio files WAV/OGG
2 Mb of Flash memory
MINI board (very small)
8x trigger
Autonomous
Audio files WAV/OGG
2 Mb of Flash memory
MINI board (very small)
8x trigger
Autonomous
€18.09
BeagleBone Black case (BBB)
In Stock
Adafruit's Case for BeagleBone Black - 2 pieces - black and transparent
€12.60
Bidirectional I2C isolator, ISO1540
In Stock
I2C isolator, ISO1540 breakout
Bidirectional
Level shifter
1 Mhz
3-5V compatible
Stemma QT, Qwiic compatible
Bidirectional
Level shifter
1 Mhz
3-5V compatible
Stemma QT, Qwiic compatible
€10.29
Bluefruit LE Shield - Bluetooth LE for Arduino
Last items in stock
Bluetooth LE shield for Arduino (SPI Interface)
€25.10
BMP280 Barometric pressure + Temperature + Altitude sensor - 3.3 et 5V
In Stock
BMP280 - Environmental sensor
Bus: I2C or SPI (Breakout and StemmaQT)
Temperature - ±1°C accuracy
Pressure - ±1 hPa absolute accuracy
5v and 3.3V compatible
Bus: I2C or SPI (Breakout and StemmaQT)
Temperature - ±1°C accuracy
Pressure - ±1 hPa absolute accuracy
5v and 3.3V compatible
€14.50
BNO055 - 9-DOF Absolute Orientation IMU
Last items in stock
Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055
€45.50
Capacitive sensor 12-key, MPR121
Last items in stock
MPR121, Capacitive sensor
12 channels
I2C interface
3V & 5V logic
12 channels
I2C interface
3V & 5V logic
€9.62
Carte Gamepad PiGrrl 2
In Stock
GamePad board with Gameboy's style.
2 Pads 4 boutons
Bouton Start/Select
Connexions bumpers
Prêt pour GPIO Raspberry Pi
2 Pads 4 boutons
Bouton Start/Select
Connexions bumpers
Prêt pour GPIO Raspberry Pi
€6.23
€5.18
Chargeur LiIon/LiPo charger v1.2
Last items in stock
Advanced Lilon/Lipo charger - configurable charge, USB source, external source, charge during use.
€18.04