[RETIRED] USB3.0 to SATA Bridge

Give more punch to your nano computer with an USB3.0 SATA SSD controler

Boost your ODROID-XU4 / N2 / Raspberry-Pi 4 / ...  to the next level of storage performance with SSD or HDD.
USB3.0 to SATA Bridge Board contains a USB3.0 to SATA3 controller (Genesis GL3321G) allowing interfacing of a single 2.5" SATA HDD/SDD.
USB3.0 to SATA Bridge Board offers data and power to the storage.

• Dimension : 48 x 29 x 6 mm (approx., including connector)
• Interface : Micro-USB3.0
• Connector : Compatible with 2.5inch SATA HDD / SSD
• Control IC : GL3321G2 (VID:PID = 05E3:0735)

Performances Tests on ODroid-XU4

An SSD write and read tests with ODROID-XU4 USB 3.0 on Linux platform in the real world.

Write test
dd if=/dev/zero of=test oflag=direct bs=4M count=256
256+0 records in
256+0 records out
1073741824 bytes (1.1 GB) copied, 8.3077 s, 132.4 MB/s

Read test
dd if=test of=/dev/null iflag=direct bs=4M
256+0 records in
256+0 records out
1073741824 bytes (1.1 GB) copied, 7.4352 s, 144 MB/s

Performances Tests on ODroid-C1/C2

An SSD write and read tests with ODROID-C1/C2 USB 2.0 on Linux platform in the real world.

Write test
dd if=/dev/zero of=test oflag=direct bs=4M count=256
256+0 records in
256+0 records out
1073741824 bytes (1.1 GB) copied, 30.8774 s, 34.8 MB/s

Read test
dd if=test of=/dev/null iflag=direct bs=4M
256+0 records in
256+0 records out
1073741824 bytes (1.1 GB) copied, 28.6036 s, 37.5 MB/s

Content

For each order, you will receive

• USB3.0 to SATA Bridge Board
• Micro-USB3.0 Cable (400mm approx.)
• 4 x Black rubber rings (it is necessary when you install a HDD/SDD into the VuShell for VU7.)

ODroid Board, SSD and other items not included.