IPC3100 : CM5 industrial computer - Dual LAN - configuration with 4G, WiFi, GPS
zoom_out_map
chevron_left chevron_right
New

IPC3100 : CM5 industrial computer - Dual LAN - configuration with 4G, WiFi, GPS

Industrial Computer (IPC)

  • Compute Module 5 - configurable
    - 2 to 16 Go RAM
    - 16 to 64 Go eMMC
  • Double LAN
  • RS485/RS232
  • WiFi/Ble (optional)
  • 4G (optional)

Request your quote

Secure payments
Payments are secured by LyraCollect, a French payment collection company.
Multiple delivery solutions
It is possible to delivered to your home, to a pick-up point or picked up by appointment at MCHobby
Parcels packed with care and efficiency
We prepare, pack and ship your orders with great respect and care.

The IPC3100 serie - a configurable IPC based on Raspberry-Pi Compute Module 5

[ Request your quote ]

The IPC3100 series is an industrial computer based on the configurable Compute Module 5 (CM5).
Depending on the CM5 model chosen for your IPC3100, it will have more or less resources. The IPC3100 series also allows you to add options such as NVMe reader, 4G+GPS modem, etc.

This IPC3100 serie does not offers CAN support and isolated digital input/output (feature available on the IPC3630 serie).

This industrial computer has the following standard features:

  • Compute Module 5
    - Broadcom BCM2712, quad core Arm Cortex-A76 (ARM v8) 64-bit SoC @ 2GHz
    - Up to 16GB LPDDR4 RAM (depend on CM5 module selected)
    - H.265 (HEVC), up to 4Kp60 decode
    - OpenGL ES 3.1 & Vulkan 1.2
    - Up to 64GB eMMC storage (depend on CM5 module selected)
    - support for Micro-SD Card storage
    - support for M.2 NVMe SSD storage
    - optional 2.4GHz and 5GHz Wi-Fi, Bluetooth
  • Dual LAN Interface
    - 1x Gigabit Ethernet
    - 1x 100M Ethernet
  • 4x isolated RS232/RS485 with electrostatic and surge protection
  • optional 4G LTE
  • Input voltage: 9V~36V DC with reverse polarity protection, overvoltage protection and overcurrent protection
  • Integrated supercapacitor backup power (optional),
  • RTC, Watch Dog, EEPROM and encryption chip
  • Temperature range of -25℃~60℃ for working environment
  • High-quality metal case,
  • compatible with DIN-rail installation

The IPC3100 serie can be used with one of the following operating systems

  • Raspberry Pi OS (Desktop) 32-bit
  • Raspberry Pi OS (Lite) 32-bit
  • Raspberry Pi OS (Desktop) 64-bit
  • Raspberry Pi OS (Lite) 64-bit

What is an IPC ?

IPC stands for "Industrial PC", a computer specially designed for use in an industrial environment which is - by definition - much less welcoming than your office.
IPCs are therefore more robust mechanically, electrically and environmentally. Like computers, IPCs have powerful processors and embedded peripherals capable of withstanding harsher environments.
So, there are no mechanical elements like CD players, mechanical hard drives are replaced by NVME drives (or eMMC soldered to the motherboard). The IPC is not afraid of vibrations, shocks or temperature variations.
IPCs are also intended for performing specific tasks where desktop computers are rather intended for multimedia use.
In fact, IPCs also consume much less energy, require little (if any) maintenance and are available 24/7.

IPC3100 model variants

There are many variants in the IPC3100 series with different combinations of:

  • RS485 & RS232 buses
  • Compute Module 5 (so RAM, eMMC, no-WiFi/WiFi)
  • Module 4G & GPS (or none)
  • SuperCapacitor Module (or not)

Need a specific model? contact sav (at) mchobby (dot) be and ask for your quote for the desired reference.
The reference is coded as follows:

Nomenclature série ED-IPC3100

Technical details

Front face

Power 1x DC IN, 2-Pin 3.5mm pitch phoenix terminals with screw holes.It supports 9V~36V input, the signal is defined as VIN+/GND.
Audio

Optionnal. Only ED-IPC3120 contains this interface.
1x Audio In/Stereo Out, 3.5mm audio jack connector. It can be used as MIC IN and LINE OUT.

  • When a headphone is connected, the audio output switches to the headphone.
  • When no headphone is connected, the audio output switches to the speaker.

RS485 / RS232

12-Pin 3.5mm pitch phoenix terminals with IO isolator, which are equipped with electrostatic and surge protection. Different numbers of RS232 and RS485 ports can be selected according to actual application. The signal of RS485 is defined as IGND/A/B, and the signal of RS232 is defined as IGND/TX/RX.

  • ED-IPC3110:2 x RS485 + 2 x RS232
  • ED-IPC3120:2 x RS485 + 2 x RS232
  • ED-IPC3130:3 x RS485 + 1 x RS232
  • ED-IPC3140:4 x RS485 (no RS232)
Ethernet 1000M 1x adaptive 10/100/1000M Ethernet port, RJ45 connector. It can be used to access the network.
Ethernet 100M 1x adaptive 10/100M Ethernet port, RJ45 connector. It can be used to access the network.

Back face

SD card slot 1x Micro SD card slot, which is used to install SD card for storing user data.
SIM card slot 1x Nano SIM card slot, which is used to install SIM card for getting 4G signal.
Micro USB 1 x Micro USB port, which supports to flash to eMMC for the system.

Side

HDMI 1x HDMI port, type A connector. It is compatible with HDMI 2.1 standard and supports 4K 60Hz.
USB 2.0 2x USB 2.0 ports, type A connector, supporting up to 480Mbps transmission rate.
Antenna 2x SMA connector, using to connect 4G antenna and Wi-Fi/BT antenna.

Buttons and indicator

RESET Button Reset button, which can reset the device.
PWR LEDs red power indicator, which is used to check the status of device power-on and power-off.
4G LEDs green 4G indicator, which is used to check the status of 4G signal.
ACT LEDs green system indicator, which is used to check the working status of device.
USER LEDs green user indicator, user can customize a status according to actual application.
COM1-COM4 LEDs 4x green UART indicators, using to check the communication status of UART ports.

IO Expansion

12V 1A 3x DC OUT, 2-Pin 2.0mm pitch WTB connector, supporting 12V 1A output.
These pins are defined as GND/12V, reserving to provide power supply for extended LCD.
5V 1A 1x DC OUT, 3-Pin 2.0mm pitch WTB connector, supporting 5V 1A output.
These pins are defined as GND/5V/GND, reserving to provide power supply for extended LCD.
GPIO-10 1x 10 pins GPIO Header, 2x5-Pin 2.54mm pitch header, using to lead out the expansion GPIO ports.
User can customize the function according to actual application, these pins are defined as 8xGPIO/3V3/GND.
GPIO-40

1x GPIO Pin Header, 2x20-Pin 2.54mm pitch, using to lead out the GPIO ports of CM5.
These pins are defined as GPIO1~GPIO27/3V3/5V2/GND.
It is Compatible with expansion modules, and reserves to connect expansion accessories.

CSI Optional. Only ED-IPC3120 contains this interface.
1x Pin Header, 2x 15-Pin 0.4mm pitch connector, supporting 2-Lane CSI signal.
It can be used to connect 800M CSI camera.
HDMI Optional. Only ED-IPC3120 contains this interface.
1 x FPC HDMI, 40-Pin 0.5mm pitch FPC connector, which can be reserved to connect
extended LCD, supporting USB/I2C touch screen and backlight adjustment.
DSI Optional. Only ED-IPC3120 contains this interface.
1x FPC DSI, 30-Pin 0.5mm pitch FPC connector, supporting 4-Lane DSI signal.
It can be reserved to connect extended LCD, supporting USB/I2C touch screen and backlight adjustment.
USB conn. 1x USB 2.0, 5-Pin 1.5mm pitch WTB connector, supporting to expand the USB 2.0 port.
M.2 conn. 1x M.2 B Key connector, supporting to connect SSD. It is compatible with M.2 B 2230 and M.2 B 2242 SSD.
Speaker Optionnel. Only ED-IPC3120 contains this interface.
1x PA output, 4-Pin 1.5mm pitch connector, dual channel stereo audio output.
It can be extended to connect two 4Ω 3W stereo speakers, these pins are defined as R+/R-/L+/L-.

Other expansion

EEPROM Supports 4K byte storage and improves the ease of use of device.
Encryption chip It can be matched to realize the required upper layer application and improves the security of device.
RTC RTC with 1F SuperCAP backup, which can ensure that the system clock is not affected by device power-off.
EdaTec also provide a battery base, and you can buy a CR1220 battery backup for RTC.
Buzzer A tip or an abnormity can be configurated according to actual application, which realizes the alarm function.

Watchdog

This function has been reserved on hardware. But we need additional software to support it, which is under development.

Wifi / Bluetooth

Optional depending on the selected CM5.

2.4GHz & 5GHz dual-band Wi-Fi and Bluetooth 5.0 with antenna

  • 2.4GHz Wi-Fi: Compatible with IEEE 802.11 b/g/n
  • 5GHz Wi-Fi: Compatible with IEEE 802.11 a/n/ac
  • The Bluetooth supports 2402MHz ~ 2480MHz frequency.

4G module

Optional in the IPC configuration.

Connect with various 4G LTE modules through the Mini PCIe interface. IPC with 4G module expose a second antenna.
The current selection reflect 4G modules allowed in Europe. Edatec can also provides modules compatible for other countries regulation.

EC25-EUX Module (Europe/Middle East/Africa/Thailand)

  • LTE FDD: B1/B3/B7/B8/B20/B28A
  • LTE TDD: B38/B40/B41
  • WCDMA: B1/B8
  • GSM/EDGE: B3/B8
  • GPS/GLONASS/BDS/Galileo/QZSS

EC25-EM Module (Europe/Middle East/Africa/South-East Asia)

  • LTE FDD: B1/B3/B7/B8/B20/B28
  • LTE TDD: B38/B40/B41
  • WCDMA: B1/B5/B8
  • GSM/EDGE: B3/B8
  • GPS/GLONASS/BDS/Galileo/QZSS

Other

  • Input voltage: 9-36V DC
  • Power consumption: 24W Max
  • Dimension: 143mm x 100mm, Height 35mm (without antenna and Din-Rail)
  • Weight: 750gr
  • Mount: Din-Rail
  • Operating temp.: -25°C to 60°C
  • Storage temp: -25°C to 60°C
  • Humidity: 5% to 95% (non-condensing)

Content

For each order you will receive:

  • 1x ED-IPC3100 Unit (fitting your configuration request)
  • [WiFi/BT Version - optional] 1 x 2.4GHz/5GHz Wi-Fi/BT Antenna
  • [4G Version - optional] 1 x 4G/LTE Antenna

This device requires a power supply (not included).

Tutorial

ED-IPC3100
3232100027619
Raspberry Compatibility
CM5
CPU RAM
2 GB, 4 GB, 8 GB, 16 Go
CPU Frequency
2.0 GHz
WiFi
External ant.
Bluetooth
BLE ?.??
Storage capacity
16 GB, 32 GB, 64 GB