IPC3630 : CM5 industrial computer - Dual LAN - configuration with 4G, WiFi, GPS, CodeSys
Industrial Computer (IPC)
- Compute Module 5 - configurable
- 2 to 16 Go RAM
- 16 to 64 Go eMMC - Double LAN
- RS485/RS232
- Bus CAN
- Isolated Input/Ouput
- WiFi/Ble (optional)
- 4G (optional)
Request your quote
Payments are secured by LyraCollect, a French payment collection company.
It is possible to delivered to your home, to a pick-up point or picked up by appointment at MCHobby
We prepare, pack and ship your orders with great respect and care.
The IPC3630 serie - a configurable IPC based on Raspberry-Pi Compute Module 5
[ Request your quote ]
The IPC3630 series is an industrial computer based on the configurable Compute Module 5 (CM5).
Depending on the CM5 model chosen for your IPC3650, it will have more or less resources. The IPC3630 series also allows you to add options such as NVMe reader, 4G/LTE+GPS modem, etc.
This industrial computer has the following standard features:
- Compute Module 5
- Broadcom BCM2712, quad core Arm Cortex-A76 (ARM v8) 64-bit SoC @ 2GHz
- Up to 16GB LPDDR4 RAM (depend on CM5 module selected)
- H.265 (HEVC), up to 4Kp60 decode
- OpenGL ES 3.1 & Vulkan 1.2
- Up to 64GB eMMC storage (depend on CM5 module selected)
- support for Micro-SD Card storage
- support for M.2 NVMe SSD storage
- optional 2.4GHz and 5GHz Wi-Fi, Bluetooth - Dual LAN Interface
- 1x Gigabit Ethernet
- 1x 100M Ethernet - 4x isolated RS232/RS485 with electrostatic and surge protection
- 2x isolated CAN with led indicator, support CAN 2.0B standard
- 8x isolated Digital Input with led indicator, support AC input
- 8x isolated Digital Output with led indicator, support overcurrent protection
- optional 4G LTE
- optional CODESYS Control for Raspberry Pi MC (Motion Control), SL (SoftPLC, transform a computer into a PLC)
- input voltage: 9V~36V DC with reverse polarity protection, overvoltage protection and overcurrent protection
- Integrated supercapacitor backup power (optional),
- RTC, Watch Dog, EEPROM and encryption chip
- Temperature range of -25℃~60℃ for working environment
- High-quality metal case,
- compatible with DIN-rail installation
The IPC3630 serie can be used with one of the following operating systems
- Raspberry Pi OS (Desktop) 32-bit
- Raspberry Pi OS (Lite) 32-bit
- Raspberry Pi OS (Desktop) 64-bit
- Raspberry Pi OS (Lite) 64-bit
What is an IPC ?
IPC stands for "Industrial PC", a computer specially designed for use in an industrial environment which is - by definition - much less welcoming than your office.
IPCs are therefore more robust mechanically, electrically and environmentally. Like computers, IPCs have powerful processors and embedded peripherals capable of withstanding harsher environments.
So, there are no mechanical elements like CD players, mechanical hard drives are replaced by NVME drives (or eMMC soldered to the motherboard). The IPC is not afraid of vibrations, shocks or temperature variations.
IPCs are also intended for performing specific tasks where desktop computers are rather intended for multimedia use.
In fact, IPCs also consume much less energy, require little (if any) maintenance and are available 24/7.
IPC3630 model variants
There are many variants in the IPC3630 series with different combinations of:
- RS485 & RS232 buses
- Compute Module 5 (so RAM, eMMC, no-WiFi/WiFi)
- Module 4G & GPS (or none)
- SuperCapacitor Module (or not)
- CodeSys Control (or not)
Need a specific model? contact sav (at) mchobby (dot) be and ask for your quote for the desired reference.
The reference is coded as follows:
Technical details
Front face
| Power | 1x DC IN, 2-Pin 3.5mm pitch phoenix terminals with screw holes.It supports 9V~36V input, the signal is defined as VIN+/GND. |
| RS485 / RS232 |
12-Pin 3.5mm pitch phoenix terminals with IO isolator, which are equipped with electrostatic and surge protection. Different numbers of RS232 and RS485 ports can be selected according to actual application. The signal of RS485 is defined as IGND/A/B, and the signal of RS232 is defined as IGND/TX/RX.
|
| Ethernet 1000M | 1x adaptive 10/100/1000M Ethernet port, RJ45 connector. It can be used to access the network. |
| Ethernet 100M | 1x adaptive 10/100M Ethernet port, RJ45 connector. It can be used to access the network. |
| CAN bus |
2x CAN ports, 6-Pin 3.5mm pitch phoenix terminals
|
| Digital Input |
8x DI ports, 10-Pin 3.5mm pitch phoenix terminals
|
| Digital Output |
8 x DO ports, 10-Pin 3.5mm pitch phoenix terminals
|
Back face
| SD card slot | 1x Micro SD card slot, which is used to install SD card for storing user data. |
| SIM card slot | 1x Nano SIM card slot, which is used to install SIM card for getting 4G signal. |
| Micro USB | 1 x Micro USB port, which supports to flash to eMMC for the system. |
Side
| HDMI | 1x HDMI port, type A connector. It is compatible with HDMI 2.1 standard and supports 4K 60Hz. |
| USB 2.0 | 2x USB 2.0 ports, type A connector, supporting up to 480Mbps transmission rate. |
| Antenna | 2x SMA connector, using to connect 4G antenna and Wi-Fi/BT antenna. |
Buttons and indicator
| RESET | Button | Reset button, which can reset the device. |
| PWR | LEDs | red power indicator, which is used to check the status of device power-on and power-off. |
| 4G | LEDs | green 4G indicator, which is used to check the status of 4G signal. |
| ACT | LEDs | green system indicator, which is used to check the working status of device. |
| USER | LEDs | green user indicator, user can customize a status according to actual application. |
| COM1-COM4 | LEDs | 4x green UART indicators, using to check the communication status of UART ports. |
| CAN0-CAN1 | LEDs | 2x green CAN indicators, using to check the communication status of CAN ports. |
| X0-X7 | LEDs | 8x green DI indicators, using to check the input status of DI ports. |
| Y0-Y7 | LEDs | 4x green DO indicators, using to check the output status of DO ports. |
IO Expansion
| 12V 1A | 3x DC OUT, 2-Pin 2.0mm pitch WTB connector, supporting 12V 1A output. These pins are defined as GND/12V, reserving to provide power supply for extended LCD. |
| 5V 1A | 1x DC OUT, 3-Pin 2.0mm pitch WTB connector, supporting 5V 1A output. These pins are defined as GND/5V/GND, reserving to provide power supply for extended LCD. |
| GPIO | 10 pins GPIO Header, 2x5-Pin 2.54mm pitch header, using to lead out the expansion GPIO ports. User can customize the function according to actual application, these pins are defined as 8xGPIO/3V3/GND. |
| USB conn. | 1x USB 2.0, 5-Pin 1.5mm pitch WTB connector, supporting to expand the USB 2.0 port. |
| M.2 conn. | 1x M.2 B Key connector, supporting to connect SSD. It is compatible with M.2 B 2230 and M.2 B 2242 SSD. |
Other expansion
| EEPROM | Supports 4K byte storage and improves the ease of use of device. |
| Encryption chip | It can be matched to realize the required upper layer application and improves the security of device. |
| RTC | RTC with 1F SuperCAP backup, which can ensure that the system clock is not affected by device power-off. EdaTec also provide a battery base, and you can buy a CR1220 battery backup for RTC. |
| Buzzer | A tip or an abnormity can be configurated according to actual application, which realizes the alarm function. |
Watchdog |
This function has been reserved on hardware. But we need additional software to support it, which is under development. |
Wifi / Bluetooth
Optional depending on the selected CM5.
2.4GHz & 5GHz dual-band Wi-Fi and Bluetooth 5.0 with antenna
- 2.4GHz Wi-Fi: Compatible with IEEE 802.11 b/g/n
- 5GHz Wi-Fi: Compatible with IEEE 802.11 a/n/ac
- The Bluetooth supports 2402MHz ~ 2480MHz frequency.
4G module
Optional in the IPC configuration.
Connect with various 4G LTE modules through the Mini PCIe interface. IPC with 4G module expose a second antenna.
The current selection reflect 4G modules allowed in Europe. Edatec can also provides modules compatible for other countries regulation.
EC25-EUX Module (Europe/Middle East/Africa/Thailand)
- LTE FDD: B1/B3/B7/B8/B20/B28A
- LTE TDD: B38/B40/B41
- WCDMA: B1/B8
- GSM/EDGE: B3/B8
- GPS/GLONASS/BDS/Galileo/QZSS
EC25-EM Module (Europe/Middle East/Africa/South-East Asia)
- LTE FDD: B1/B3/B7/B8/B20/B28
- LTE TDD: B38/B40/B41
- WCDMA: B1/B5/B8
- GSM/EDGE: B3/B8
- GPS/GLONASS/BDS/Galileo/QZSS
Other
- Input voltage: 9-36V DC
- Power consumption: 24W Max
- Dimension: 143mm x 100mm, Height 50mm (without antenna and Din-Rail)
- Weight: 1Kg
- Mount: Din-Rail
- Operating temp.: -25°C to 60°C
- Storage temp: -25°C to 60°C
- Humidity: 5% to 95% (non-condensing)
Content
For each order you will receive:
- 1x ED-IPC3630 Unit (fitting your configuration request)
- [WiFi/BT Version - optional] 1 x 2.4GHz/5GHz Wi-Fi/BT Antenna
- [4G Version - optional] 1 x 4G/LTE Antenna
This device requires a power supply (not included).
Tutorial
- ED-IPC3630 serie : Manufacturer page (EdaTec, English)
Legal document
This product have comply to the following certification. It can be made available on request.
- FCC
- FCC 47 CFR Part 15 Subpart B
- CE
- EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3
- EN 55032/EN 55035
- EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52
- EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2
- Raspberry Compatibility
- CM5
- CPU RAM
- 2 GB, 4 GB, 8 GB, 16 Go
- CPU Frequency
- 2.0 GHz
- WiFi
- External ant.
- Bluetooth
- BLE ?.??
- Storage capacity
- 16 GB, 32 GB, 64 GB