Breakout L298 - Double pont H
zoom_out_map
chevron_left chevron_right

L298 Breakout - Double H-Bridge

Double H-Bridge L298N to control motors:

  • 2 motors,
  • 2 directions of rotation,
  • speed control
€11.07 (tax incl.) €9.15 (tax excl.)
Tax included
check In Stock
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Description

An H-Bridge capable to drive 2 motors in the 2 rotations direction

Here is a really useful breakout board! Based on a L298N (Double H-bridge) it contains all the elements needed to easily motorize two continuous motors from a microcontroller. The breakout board can be connected directly to a microcontroller.

Since the heart of this product is a double H-bridge L298, each of the motor is controllable in both directions of rotation!

It is also possible to control the speed of these by applying a PWM signal on the corresponding "Enable" pin of the H-bridge. 

Our breakout board has a dissipation circuit, which allows it to maintain a current of 2 amperes. It can power your motors using an independent  voltage source (up to ~35V DC)

Equipped with its essential protection diodes but also a voltage regulator, the designers of this breakout board has also provided connections "Current Sense" allowing the measurement in real time of the loads of the H-bridge. This feature is not active by default but remains fully accessible when needed

This breakout board is also suitable for the control of a 4-wire stepper motor (see our documentation).

Ideas of use

  • Motor-based mounting control
  • Control of the motors of an unmanned vehicle (car, "tank")
  • Stepper motor control (4 wires)
 

Characteristics

  • Light, small
  • Unmatched capabilities for motor control
  • Diodes of protection
  • A dissipator (to dissipate heat in case of heavy loads)
  • A selector to select the power source
  • 4 Selectors for Pull up resistors
  • Output for 2 continuous motor / 1 stepper motor (4 coils, two phases)
  • LED indicator for motor direction of rotation
  • LED indicator for 5V power supply
  • 4 standard fixing holes
 

Specifications

  • Power control component: L298N
  • Power supply: +6V to +35V
  • Max current (peak): 2A
  • Vss Logic control voltage: +5 to +7V (internal +5V supply)
  • Logic control current: 0 to 36mA
  • Voltage for direction control: Low -0.3V~1.5V, high: 2.3V~Vss
  • Voltage for "Enable" control: Low -0.3V~1.5V, high: 2.3V~Vss
  • Max power: 25W (Temperature 75 ℃)
  • Operating temperature: -25℃ to +130℃
  • Dimensions: 60mm x 54mm
  • Weight: ~48g

Tutorials

Data sheet
L298
3232100000759