[T] - Momentarily button - red LED
zoom_out_map
chevron_left chevron_right

[T] - Momentarily button - red LED

Chromed button - momentarily - 16mm - Red LED ring

€7.03 (tax incl.) €5.81 (tax excl.)
Tax included
check In Stock
Secure payments
Payments are secured by LyraCollect, a French payment collection company.
Multiple delivery solutions
It is possible to delivered to your home, to a pick-up point or picked up by appointment at MCHobby
Parcels packed with care and efficiency
We prepare, pack and ship your orders with great respect and care.
Description

A chrome-plated button with red LED ring - momentarily

This metallic button is chrome plated, robust and "weatherproof". Note the use of Weatherproof (not WaterProof), this means it is moisture resistant (caused by weathering) but not "WaterProof" (water resistance and direct splash).

Behind these sealing considerations, you will also find a button with a really cool look and finish offering a pro style to your assemblies! Drill a 16mm hole in any material up to 12.5mm thick and the button will fit. This button comes with a rubber gasket to prevent water seepage into the case. The front of the button has a flat surface (also metal) which is a switch surrounded by a plastic ring for the LED display.

The back is equipped with 3 contacts for the button (common, normally open and normally-closed) and 2 other contacts for the LED ring (+ and -). Connect a 3-6V power supply to the LED to see it light up, the push button contains a resistor to limit the current to the LED! If you want to use a higher voltage, like 12V or 24V, just add a 470 ohm resistor in series with the LED to keep the LED current at around 20mA.

This push button contains a normally open contact and a normally closed contact. If you press the button, the normally-open contact is connected to common as long as the button is "pressed". When you release the button, it returns to its original position and the normally-open contact is "open" again.

The push button and LED are separate, so you can plug it in to turn it on when your rig is powered up (and vice versa) or control the LED as you wish (blinking, pulsing, etc). See the technical details for more information!

What is awesome about this product is that: 

    1. The push button includes a normally open contact + a normally closed contact (which reverse).
      This is rather rare in the consumer product.
    2. There is no connection between the LED circuit and the push button.
      You can therefore cut a "high voltage" circuit while the LED is supplied with a 5V PWM signal from your microcontroller (to make the LED pulse... like on modern computers).

Technical details

  • Drill a hole with a diameter of 16mm
  • Breaking capacity: 3A at 250VDC
  • Push button contacts: 1 NO (normally open), 1 NC (normally closed)
  • Material: Chrome-plated over brass
  • Grade: IP40/IP67
  • Contact resistance: < 50 MOhm
  • Insulation resistance: > 1000 MOhm
  • Temperature: -20 C to +55 C
  • Lifetime - mechanical: > 500,000 cycles
  • Lifetime - electrical: > 50,000 cycles
  • Support thickness: from 1 to 13mm
  • Operating pressure: 1.5 to 2.5 N
  • Lighting power supply: 6V
  • Button weight: 13.9 gr
  • Dimensions: see in the product images.

Tutorial

Data sheet
BTN-LEDRING-MOM-RED
3232100007024
You might also like