Accu Lipo - 3.7v 1300mAh
zoom_out_map
chevron_left chevron_right

Lipo Battery - 3.7v 6600mAh

Lithium Ion Polymer (Lipo) battery - 3.7v 6600mAh

€28.07 (tax incl.) €23.20 (tax excl.)
Tax included
notifications_active Last items in stock
Secure payments
Payments are secured by LyraCollect, a French payment collection company.
Multiple delivery solutions
It is possible to delivered to your home, to a pick-up point or picked up by appointment at MCHobby
Parcels packed with care and efficiency
We prepare, pack and ship your orders with great respect and care.

Projects and nano-computer getting high autonomy with a 6600mAh Lipo battery

Lithium Ion Polymer batteries (also known as 'lipo' or 'lipoly') are compact, light and powerful. The output voltage is in the range of 4.2V when fully charged to 3.7V. This battery has a capacity of 6600mAh for a total of about 26.4Wh

If you need a less powerful battery, there is also a 1200mAh, 2500mAh and 4400mAh model.

The battery is delivered with a 2-pin JST-PH connector (see picture) and has the necessary protective circuitry. Thanks to their real JST connector, not a compatible version, the connection/disconnection will be done smoothly and you are safe from cable tears, problems of correct connection, more or less suitable insertions.

The protective circuitry prevents battery voltage from climbing too high (over-charge) or too low (over-use/over-discharge) which means that the battery will shut off automatically when it is completely dead and reaches the voltage of 3.0V. It will also protect the battery against short-circuits. However, even with these protections it is very important to use ONLY a constant current/ constant voltage Lilon/LiPoly charger with a charging current of 1300mA or less. Example of LiIon/LiPoly charger with constant current/constant voltage.

Like most LiPo's, this battery is not equipped with an integrated thermistor. This is why it is suggested to charge at max 1/2C (or even less). 3300mA is the maximum in this case but it is already a very important current, so we recommend to limit the recharge to 1300mA (ie <1/4C). Even 500mA is correct since it is the maximum current you can get from a USB port.

Additional safety note: Don't use a NiMH/NiCard/acid battery charger! Also, do not abuse this type of battery, do not short-circuit, twist, crush or break. As with all Lithium Ion Polymer batteries and any type of power source - they should be used by experienced people (experts) who are comfortable with power supplies.

For electronic application only

These batteries are designed for electronic project power and not for motor propulsion. The battery is equipped with a protection circuit that deactivates the battery if its voltage drops below 3V or if the current is too high.
The discharge current of this type of battery is 0.5C to 1C MAX!
For example: a 500mAh 1C battery could produce a current of 1x500mA = 500mA max

f you need to motorize a project, you have to look for modeling batteries able to deliver several C. Indeed, the starting of a motor creates a very important current draw (close to the current of short-circuit), therefore, a suitable battery is required. 
Some modeling batteries are able to deliver up to 35C!
Example: a battery of 2500mAh 35C could produce a current 35x2500mA = 87500mA = 87.5A without flinching! What ensure the start of any type of motor.  
Be careful however, these batteries have no protection and can catch fire if they are not used/charged/discharged correctly.

Technical details

  • Weight: 138g
  • Size: 68mm x 54mm x 18mm
  • Output: 6600mAh at 3.7V (nominal voltage), cutoff at 3.0V, recharge voltage 4.2v
  • Recommended charge current: 1320mA
  • Charge current max: 3300mA
  • Recommended discharge current: 3300mA (1/2 C)
  • Discharge current max: 6600mA (1 C)
  • Impedance: 60mOhms at 1KHz
  • Operating temperature:
    • Charge: 0 - 55°C
    • Discharge: -25°C to +60°C
  • Loss of capacity after 500 charge/discharge cycles

Tutorials

ACC-LIPO-6.6Ah
3232100007475