Breakout board
There are 120 products.
[T] - Micro SD adapter - Extra version
In Stock
A MicroSD (breakout board) adapter designed for easy use but which also goes further than its concurrents
€9.95
[T] - Pilote 2 moteurs DRV8835 pour Raspberry Pi 2 et Pi B+
In Stock
This product is being translated
Pilote 2 moteurs - DRV8835 - pour 2 moteurs
Pilote 2 moteurs - DRV8835 - pour 2 moteurs
€9.90
Level Shifter - 8 channels - Bi-Directionnal
In Stock
5V <-> 3V to 8-channel bidirectional Logic converter
€9.68
Capacitive sensor 12-key, MPR121
Last items in stock
MPR121, Capacitive sensor
12 channels
I2C interface
3V & 5V logic
12 channels
I2C interface
3V & 5V logic
€9.62
Electret Amplifier Microphone - MAX9814 with auto-gain
Last items in stock
Auto-Gain amplified electret microphone
MAX9814 amplifier
Microphone 20-20KHz
Auto gain (automatically adjust the gain).
MAX9814 amplifier
Microphone 20-20KHz
Auto gain (automatically adjust the gain).
€9.62
Gestionnaire d'alimentation solaire 5V, PowerBoost
In Stock
Solar power manager
CN3065 controler
For 5V 1A solar panel
Charging via USB/Solar
Charge @ 900mA max
Discharge @ 1000mA max
DFR0559
CN3065 controler
For 5V 1A solar panel
Charging via USB/Solar
Charge @ 900mA max
Discharge @ 1000mA max
DFR0559
€9.56
[T] - Emetteur RF (pour nos récepteurs) - 4 boutons
In Stock
This product is being translated
Emetteur/télécommande RF - Porte clé - 4 Boutons
Emetteur/télécommande RF - Porte clé - 4 Boutons
€9.51
[T] - Senseur Capacitif (5 zones) - momentané - AT42QT1070
In Stock
This product is being translated
Senseur capacitif 5 points - action momentanée - AT42QT1070
Senseur capacitif 5 points - action momentanée - AT42QT1070
€9.28
[T] - Multiplexeur I2C TCA9548A
In Stock
This product is being translated
Dupliquer le bus I2C avec un multiplexeur 1-vers-8 bus I2C
Dupliquer le bus I2C avec un multiplexeur 1-vers-8 bus I2C
€8.75
[T] - Micro Electret Amplifier - MAX4466 with adjustable gain
In Stock
Add an ear to your projects with this well-designed electret microphone. Breakout assembled and tested equipped with a 20-20KHz microphone with adjustable gain.
€8.72
AD9833 - sinus, Triangle, Clock signal generator - 0 to 12.5 Mhz
In Stock
Signal generator for Sinus, Triangle, Clock
0 to 12.5 Mhz (28 bits resolution)
0 to 2.Pi phase shifting (12 bits resolution)
0.6 Vpp
SPI interface (mode 2)
0 to 12.5 Mhz (28 bits resolution)
0 to 2.Pi phase shifting (12 bits resolution)
0.6 Vpp
SPI interface (mode 2)
€7.87
[T] - Antenne GSM Quad-Band - 2dBi SMA
In Stock
This product is being translated
Antenne GSM/Mobile 4 bandes, conn. SMA, 2dBi - connecteur coudé
Antenne GSM/Mobile 4 bandes, conn. SMA, 2dBi - connecteur coudé
€7.59
€7.49
€7.49
€7.49
[T] - LiIon/LiPoly Backpack pour Trinket Pro
In Stock
This product is being translated
Utiliser un Accu Lipo/LiPoly pour alimenter un Trinket Pro
Utiliser un Accu Lipo/LiPoly pour alimenter un Trinket Pro
€7.48
2 axis analog joystick + button
In Stock
Analog Joystick as kit
2 analog axis
Clic button
kit (easy to assemble)
PSP/Xbox style
2 analog axis
Clic button
kit (easy to assemble)
PSP/Xbox style
€7.42
Power control push-button with FET
In Stock
Power control with push button
Breakout Adafruit
3 to 14V DC
3A max
Kill pin (the project can shut down by itself)
Breakout Adafruit
3 to 14V DC
3A max
Kill pin (the project can shut down by itself)
€7.20
€7.01
[T] - Régul. 9V 600mA, Step Down, D24V6F9
In Stock
This product is being translated
Régulateur à découpage D24V6F9, 9V 600mA, Step-Down
Régulateur à découpage D24V6F9, 9V 600mA, Step-Down
€7.01
ATSAMD09 Breakout with seesaw
Last items in stock
Wide range of capabilities breakout
3 x 12-bit ADC inputs
3 x 8-bit PWM outputs
7 x GPIO with selectable pullup or pulldown
1 x NeoPixel output (up to 340 pixels)
1 x EEPROM with 64 byte of NVM memory (handy for storing small access tokens or MAC addresses)
1 x Interrupt output that can be triggered by any of the accessories
2 x I2C address selection pins
1 x Activity LED
3 x 12-bit ADC inputs
3 x 8-bit PWM outputs
7 x GPIO with selectable pullup or pulldown
1 x NeoPixel output (up to 340 pixels)
1 x EEPROM with 64 byte of NVM memory (handy for storing small access tokens or MAC addresses)
1 x Interrupt output that can be triggered by any of the accessories
2 x I2C address selection pins
1 x Activity LED
€6.92