WEMOS / LOLIN (ESP)
There are 26 products.
1x Double rows straight Pin Header 2x40 pin long (normal pinheader)
In Stock
1 section
2 x 40 pins (Pin Header, DOUBLE ROW)
Right
2 x 40 pins (Pin Header, DOUBLE ROW)
Right
€1.80
BH1750 shield for LOLIN Wemos D1 - Ambiant light
In Stock
Ambiant light sensor
Lux: 1 to 65535 Lux
I2C Interface
Version: v1.0.0
Lux: 1 to 65535 Lux
I2C Interface
Version: v1.0.0
€3.51
EUROCARD Prototyping board - 100 x 160mm - 3 holes
In Stock
EuroCard (prototyping board)
100 x 160mm
3 holes island
100 x 160mm
3 holes island
€8.46
€0.76
HP303B shield for LOLIN Wemos D1 - Barometric Presured and temperature
In Stock
Barometric pressure & temperature sensor
Temperature: -40 to 85°C (+/- 0.5°C)
barometric pressure: 300 - 1200 hPa
I2C interface
Version: v1.0.0
Temperature: -40 to 85°C (+/- 0.5°C)
barometric pressure: 300 - 1200 hPa
I2C interface
Version: v1.0.0
€3.87
I2C wires for Wemos - 100mm for LOLIN
In Stock
I2C wire for Wemos LOLIN
100mm
4 pins (3.3V, GND, SDA, SCL)
100mm
4 pins (3.3V, GND, SDA, SCL)
€1.82
PIR Shield for LOLIN Wemos D1 - infrared passive sensor
In Stock
PIR Sensor - Passive infrared
Digital interface
Version: v1.0.0
Digital interface
Version: v1.0.0
€3.99
Wemos LOLIN D32 PRO - ESP32 -WROVER + 16MB Flash + 8MB PSRAM
In Stock
ESP32 WROVER @ 240MHz
16 MBytes Flash
8 MBytes PSRAM
22 digital inputs/outputs
6 analog input (3.3V)
2 analog output (3.3V)
LOLIN I2C Port
LOLIN TFT Port
MicroSD connector
USB/serial converter.
Lipo battery charger
version V2.0.0
16 MBytes Flash
8 MBytes PSRAM
22 digital inputs/outputs
6 analog input (3.3V)
2 analog output (3.3V)
LOLIN I2C Port
LOLIN TFT Port
MicroSD connector
USB/serial converter.
Lipo battery charger
version V2.0.0
€20.09
WS2812B RGB shield for Wemos D1
In Stock
LED Neopixel for Wemos D1
WS2812B digital LED
Up to 16.777.216 colors
WS2812B digital LED
Up to 16.777.216 colors
€2.66
€4.99
€7.88
€3.91
€1.60
DC Power Shield for Wemos D1
Out-of-Stock
Input voltage: 7 to 24V
Max Current: 1A
Reverse polarity protection
Max Current: 1A
Reverse polarity protection
€3.70
Dual Base for LOLIN Wemos D1
Out-of-Stock
Dual Base for Wemos D1 Mini
Prototyping aread
Header included
V2.0.0
Prototyping aread
Header included
V2.0.0
€3.19
I2C Motor Shield for LOLIN Wemos D1, dual motor driver
Out-of-Stock
Dual motor controler
Output current: 1.2A (3.2A peak)
Motor voltage: 4.5 to 13.5V
I2C interface
Based on TB6612 dual H-Bridge
Output current: 1.2A (3.2A peak)
Motor voltage: 4.5 to 13.5V
I2C interface
Based on TB6612 dual H-Bridge
€6.53
Lithium battery Shield for LOLIN Wemos D1
Out-of-Stock
Lithium battery 3.3 to 4.2v
Boost power suppy 5V 1A max
Charging current: 1A max
version: 1.3.0
Boost power suppy 5V 1A max
Charging current: 1A max
version: 1.3.0
€5.81
€5.03
€2.61
OLED shield for LOLIN WEMOS - 64 x 48 - 0.66"
Out-of-Stock
OLED 64×48 pixels
0.66"
D1 Shield
I2C
Version: V2.1.0
0.66"
D1 Shield
I2C
Version: V2.1.0
€10.53
€1.57